Interest in Main Bearing studs - Page 4 - ZR-1 Net Registry Forums

tpepmeie · 10-12-2015

Quote:

Originally Posted by pantera1683

Todd,

I may be interested, just not sure I need them. At what power level do these offer an advantage over the stock bolts?

I have no quantitative data to support when these are necessary. I can say that upon teardown, my engine showed signs of the main caps "walking" with the OEM fasteners. That was a 4" stroke / 7000 rpm / 700+ crank horsepower.

The OEM fasteners are torque-to-yield, and the M12 bolt is NLA. These studs represent a convenient alternative to re-using the factory bolts.

spork2367 · 10-13-2015

Quote:

Originally Posted by tpepmeie

I have no quantitative data to support when these are necessary. I can say that upon teardown, my engine showed signs of the main caps "walking" with the OEM fasteners. That was a 4" stroke / 7000 rpm / 700+ crank horsepower.

The OEM fasteners are torque-to-yield, and the M12 bolt is NLA. These studs represent a convenient alternative to re-using the factory bolts.

I know that on the engine that I'm rebuilding now, at 112,000 miles on the factory build there were signs of slight walk/chatter.

tpepmeie · 10-16-2015

Thanks guys. This batch is now ordered. I'll let you know when they arrive.

tpepmeie · 11-07-2015

Update -- these are now finished. I will try to get them boxed and shipped this week.

Dynomite · 11-08-2015

Nice....PM sent

tpepmeie · 11-14-2015

Everything shipped out to you today. The latest delivery is Friday this week.
Thanks.

Todd

spork2367 · 11-15-2015

Thanks!

Dynomite · 11-19-2015

Received.....thanks....very nice....exactly what I needed

A26B · 11-19-2015

Got 'em! Very nice.

spork2367 · 11-21-2015

Got my two sets and they are beautiful!

10-16-2015	#33
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 812	Re: Interest in Main Bearing studs Thanks guys. This batch is now ordered. I'll let you know when they arrive.

11-07-2015	#34
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 812	Re: Interest in Main Bearing studs Update -- these are now finished. I will try to get them boxed and shipped this week.

11-08-2015	#35
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,810	Re: Interest in Main Bearing studs Nice....PM sent __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS

11-14-2015	#36
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 812	Re: Interest in Main Bearing studs Everything shipped out to you today. The latest delivery is Friday this week. Thanks. Todd

11-15-2015	#37
spork2367 Join Date: Jun 2013 Location: PA Posts: 875	Re: Interest in Main Bearing studs Thanks!

11-19-2015	#38
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,810	Re: Interest in Main Bearing studs Received.....thanks....very nice....exactly what I needed __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 11-19-2015 at 09:16 PM.

11-19-2015	#39
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,394	Re: Interest in Main Bearing studs Got 'em! Very nice. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.