Interest in Main Bearing studs
 

Hi, all. I have designed & sourced main bearing studs for the 2-bolt motors. Trying to gauge interest in how many sets to order. I believe these could be sold for $300 or less per set.

Question: at that price, is anyone else interested in a set? Lead time is ~3 weeks. Material is an aerospace grade of EN26 steel. Tensile strength 180k-200k psi. Threads are rolled. They are not ARP.

Todd

http://i1036.photobucket.com/albums/...e/IMG_0948.jpg

http://i1036.photobucket.com/albums/...e/IMG_0947.jpg

http://i1036.photobucket.com/albums/...e/IMG_0946.jpg

http://i1036.photobucket.com/albums/...e/IMG_0945.jpg

http://i1036.photobucket.com/albums/...e/IMG_0943.jpg

Re: Interest in Main Bearing studs
 

Thanks for sharing Todd.
Any chance they can also do studs for those of the 4 bolt LT5 persuasion?

Re: Interest in Main Bearing studs
 

Todd,
I could be interested in the M12 studs.

Re: Interest in Main Bearing studs
 

Sorry for hijacking, but what about head studs?

Re: Interest in Main Bearing studs
 

I'd be intersted in a set Todd.
Rich

Re: Interest in Main Bearing studs
 

I didn't get these quoted... just bought Randy's since he'd done all the work and they were available.

Re: Interest in Main Bearing studs
 

I'm sure they would, but I don't have a 4-bolt block to take the measurements. In my case, I needed 2-bolt studs and since they are doing the setup to make them, buying in quantities brings the price down.

Re: Interest in Main Bearing studs
 

I'm not aware of Randy's. How much are they?

Re: Interest in Main Bearing studs
 

I think he's put them on Ebay now for $1450.

Re: Interest in Main Bearing studs
 

Looking at a higher grade material, which would push the price for a set up another $50 or so. Still a remarkable price compared to ARP. I'm going to order 5 sets initially, keeping one for myself.