Hurst Shifter - ZR-1 Net Registry Forums

Sodak52 · 04-10-2008

I've purchased a Hurst shifter for the ZR-1 and need a little advice on installation of the shifter. I remember seeing a Thread sometime in the past showing how to install it, but can't find it. Any help would be much appreciated.

kenthompson · 04-10-2008

Quote:

Originally Posted by Sodak52

I've purchased a Hurst shifter for the ZR-1 and need a little advice on installation of the shifter. I remember seeing a Thread sometime in the past showing how to install it, but can't find it. Any help would be much appreciated.

One, open the box and make sure the bearings are in the shifter. If they are not, let me know and i'll give you the Timkin bearing number to order.

After that, read the instructions and read the FAQ here.

It's really rather simple to do. Just a PITA to get everything out of the way.

KT

tccrab · 04-10-2008

There is a write up (with pics) by Johnny "Phrogs" over on that "Other Forum Who Shall Not Be Named".
http://forums.*************.com/show....php?t=1063558
You will have to cut and paste and edit the link for it to work.
It's obvious what part is missing.

Good luck!

Tom

DMark · 04-10-2008

Quote:

Originally Posted by tccrab

There is a write up (with pics) by Johnny "Phrogs" over on that "Other Forum Who Shall Not Be Named"......

That is the write up I used and everything went great. Johnny also replied to my PMs with helpful hints.

Sodak52 · 04-10-2008

I found the link. Thanks alot. This should help alot. I'll let you know how it goes this weekend.

-=Jeff=- · 04-10-2008

Quote:

Originally Posted by tccrab

There is a write up (with pics) by Johnny "Phrogs" over on that "Other Forum Who Shall Not Be Named".
http://forums.*************.com/show....php?t=1063558
You will have to cut and paste and edit the link for it to work.
It's obvious what part is missing.

Good luck!

Tom

Chevetteforum right?

Sodak52 · 04-10-2008

Yes, it was in the Forum under Archived links.

PhillipsLT5 · 04-12-2008

Contact
www.zfdoc.com

vettepilot · 04-16-2008

Thanks for the info about checking for bearings. Sure enough mine didn't come with any although the box said it did. Please let me know the Timken numbers

Quote:

Originally Posted by kenthompson

One, open the box and make sure the bearings are in the shifter. If they are not, let me know and i'll give you the Timkin bearing number to order.

After that, read the instructions and read the FAQ here.

It's really rather simple to do. Just a PITA to get everything out of the way.

KT

karterdon · 04-16-2008

Double check your shifter again - There should be a small needle bearing cage on each side of the shifter body. I just got one from Jeg's - and the bearings are there. I can't see how they would be missing - They are press fit.

Don Yoakem
91-#267 Dark Red Met.

04-10-2008	#1
Sodak52 Join Date: Mar 2008 Location: Eagan, MN Posts: 9	Hurst Shifter I've purchased a Hurst shifter for the ZR-1 and need a little advice on installation of the shifter. I remember seeing a Thread sometime in the past showing how to install it, but can't find it. Any help would be much appreciated.

04-10-2008	#3
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,663	Re: Hurst Shifter There is a write up (with pics) by Johnny "Phrogs" over on that "Other Forum Who Shall Not Be Named". http://forums.*************.com/show....php?t=1063558 You will have to cut and paste and edit the link for it to work. It's obvious what part is missing. Good luck! Tom

04-10-2008	#5
Sodak52 Join Date: Mar 2008 Location: Eagan, MN Posts: 9	Re: Hurst Shifter I found the link. Thanks alot. This should help alot. I'll let you know how it goes this weekend.

04-10-2008	#7
Sodak52 Join Date: Mar 2008 Location: Eagan, MN Posts: 9	Re: Hurst Shifter Yes, it was in the Forum under Archived links.

04-12-2008	#8
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,446	Re: Hurst Shifter Contact www.zfdoc.com

04-16-2008	#10
karterdon Join Date: Jan 2008 Location: Antioch, Illinois Posts: 129	Re: Hurst Shifter Double check your shifter again - There should be a small needle bearing cage on each side of the shifter body. I just got one from Jeg's - and the bearings are there. I can't see how they would be missing - They are press fit. Don Yoakem 91-#267 Dark Red Met.