|
05-11-2021
|
#1 |
 Join Date: Oct 2020
Location: Coweta, Georgia
Posts: 53
|
Cam Cover Stuck
I got all the bolts out of my cam cover but it still will not budge. I have spent quite a while hitting the edges with a rubber mallet and still no luck. Is there any tricks to this? The car has 100,000 miles and I doubt the covers have been off before.
Thanks, Scott |
|
|
|
05-11-2021
|
#2 |
|
Join Date: Oct 2020
Location: Coweta, Georgia
Posts: 53
|
Re: Cam Cover Stuck
Got them off, turns out there are a couple spots where you can carefully pry them upwards.
|
|
|
|
|
05-12-2021
|
#3 |
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Cam Cover Stuck
Good to hear you got it off. Remember, their not just valve covers, their cam bearings too. So be careful how you handle them. If your sending them to a powder coater make sure they know that too and protect the cam bearing areas during their process.
H 
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
05-14-2021
|
#4 | |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Cam Cover Stuck
Quote:
Sent from my SM-G950U using ZR-1 Net Registry mobile app |
|
|
|
|
 |
|
|
Linear Mode
