ZR-1 Net Registry Forums - Cam Cover Stuck

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Technical Postings (http://zr1.net/forum/forumdisplay.php?f=9)

- - Cam Cover Stuck (http://zr1.net/forum/showthread.php?t=32993)

Shizap

05-11-2021 04:21 PM

Cam Cover Stuck

I got all the bolts out of my cam cover but it still will not budge. I have spent quite a while hitting the edges with a rubber mallet and still no luck. Is there any tricks to this? The car has 100,000 miles and I doubt the covers have been off before.
Thanks,
Scott

Shizap

05-11-2021 05:45 PM

Re: Cam Cover Stuck

Got them off, turns out there are a couple spots where you can carefully pry them upwards.

Ccmano

05-12-2021 09:56 AM

Re: Cam Cover Stuck

Good to hear you got it off. Remember, their not just valve covers, their cam bearings too. So be careful how you handle them. If your sending them to a powder coater make sure they know that too and protect the cam bearing areas during their process.
H
:cheers:

jss06c6

05-14-2021 06:14 PM

Re: Cam Cover Stuck

Quote:

Originally Posted by Ccmano (Post 323211)

Absolutely correct!!

Sent from my SM-G950U using ZR-1 Net Registry mobile app

All times are GMT -4. The time now is 12:00 PM.