Wanted: Buy or Borrow, 1990 Connector - ZR-1 Net Registry Forums

Dynomite · 05-06-2015

I have a couple but the holes are enlarged from use just like the PCV dual connector or Injector housing connectors. Put me down for three when you have the new ones in hand

The two ports are connectors from Drivers side PCV and Drivers side Charcoal Canister (1990). On the 1991 the charcoal canister being behind the passenger side rear wheel has the connector drawing Plenum Vacuum angled back under the Plenum. So on 1991 there is only one nipple on the Plenum for PCV only behind the Throttle Body.

05-06-2015	#5
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,816	Re: Wanted: Buy or Borrow, 1990 Connector I have a couple but the holes are enlarged from use just like the PCV dual connector or Injector housing connectors. Put me down for three when you have the new ones in hand The two ports are connectors from Drivers side PCV and Drivers side Charcoal Canister (1990). On the 1991 the charcoal canister being behind the passenger side rear wheel has the connector drawing Plenum Vacuum angled back under the Plenum. So on 1991 there is only one nipple on the Plenum for PCV only behind the Throttle Body. __________________ Clickable links On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS