Wanted: Buy or Borrow, 1990 Connector
 

I have decided to get these made for Jerry's Gaskets and need a good sample.

For 1990 Model only, connects under plenum, right behind throttle body, driver side.

Will Buy, Beg, Borrow or Steal(not really).

Kind of looks like this. (Thanks to Cam Potter for the drawing)

http://i69.photobucket.com/albums/i6...ps8ef47178.jpg

Re: Wanted: Buy or Borrow, 1990 Connector
 

Got one in hand Jerry. I'll bring it to BG. -Steve

Re: Wanted: Buy or Borrow, 1990 Connector
 

That's really great Steve! Thank you mucho :-)

Re: Wanted: Buy or Borrow, 1990 Connector
 

Just for reference, it's from 1990 #1786

Re: Wanted: Buy or Borrow, 1990 Connector
 

I have a couple but the holes are enlarged from use just like the PCV dual connector or Injector housing connectors. Put me down for three when you have the new ones in hand :thumbsup:

The two ports are connectors from Drivers side PCV and Drivers side Charcoal Canister (1990). On the 1991 the charcoal canister being behind the passenger side rear wheel has the connector drawing Plenum Vacuum angled back under the Plenum. So on 1991 there is only one nipple on the Plenum for PCV only behind the Throttle Body.

Re: Wanted: Buy or Borrow, 1990 Connector
 

Good news. I`d like two of them.