Phase I LT5 #026 With Phase II Upper End - ZR-1 Net Registry Forums

JThomas · 09-28-2014

I get the feeling you are on your way to building your own little
Corvette ZR-1 Museum. Telling the story from beginning to end!

Blue Flame Restorations · 09-29-2014

Joe, I got this piece from Geoff. I'm assuming that this one sat in the UK graveyard where the prototypes were scrapped. It's a neat piece. The front of the oil pan is "finned" for cooling. It also has an 8" round cutout in the bottom of the pan that's been welded shut, just like my EX5023. It was a development issue with the phase I and II motors.

I'm currently in talks to obtain a pair of Phase I heads. It's a display piece only, of course.

09-28-2014	#1
JThomas Join Date: May 2008 Location: Okemos, MI. Posts: 1,193	Re: Phase I LT5 #026 With Phase II Upper End I get the feeling you are on your way to building your own little Corvette ZR-1 Museum. Telling the story from beginning to end! __________________ Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium

09-29-2014	#2
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,899	Re: Phase I LT5 #026 With Phase II Upper End Joe, I got this piece from Geoff. I'm assuming that this one sat in the UK graveyard where the prototypes were scrapped. It's a neat piece. The front of the oil pan is "finned" for cooling. It also has an 8" round cutout in the bottom of the pan that's been welded shut, just like my EX5023. It was a development issue with the phase I and II motors. I'm currently in talks to obtain a pair of Phase I heads. It's a display piece only, of course. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project