|
02-27-2011
|
#1 |
 Join Date: Apr 2010
Location: Aberdeen, SD
Posts: 24
|
Pulled the Radio out of my dash for repair
The CD player in my radio has not worked since I purchased my car. I pulled the radio out to send to Doctor Dons for a check-up and repair. Unfortunately, when I was taking the radio cover off, I dropped one of the spring clips that hold the plastic cover to the dash. I think it dropped down along the center console, but am not exactly sure where. I only heard it twang when I pulled the plastic radio cover off. I have not been able to find it or to fish it out with my flexible magnet.
I tried to find another, but, am told the spring clip is no longer available from GM or from any other place I have looked. Does anyone know where I can find the clip (GM part # 10175544). It will be helpful when the radio comes back if I can reassemble the plastic radio cover with the correct spring clip. 
|
|
|
|
02-27-2011
|
#2 |
 
Join Date: Jun 2004
Location: Texas
Posts: 2,418
|
Re: Pulled the Radio out of my dash for repair
Try Jerry he has a few parts
 http://www.jerrysgaskets.com
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
02-27-2011
|
#3 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
Re: Pulled the Radio out of my dash for repair
ACE Hardware has them.
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
02-27-2011
|
#4 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,117
|
Re: Pulled the Radio out of my dash for repair
Quote:
Do tell Pete, Do you have a part number or know what to ask the Ace person for?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
02-27-2011
|
#5 |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
Re: Pulled the Radio out of my dash for repair
I don't have part # but if you take a clip with to show.
They might not be OE,they work and cheap. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
02-27-2011
|
#6 |
|
Join Date: Apr 2010
Location: Aberdeen, SD
Posts: 24
|
Re: Pulled the Radio out of my dash for repair
 This is a picture of the clip I need to finish installing the radio cover plate on my dash. The clip is 1-1/2" long, 1/2" wide and the spring is 1/8" deep. I have asked two body shops and they don't have anything like this. The small end has teeth on it and slides into a hole in the plastic cover plate to hold it firm. The large end snaps into a square hole in the dash. I will try Doctor Dons tomorrow. I hope someone has an idea where I can find one. 
|
|
|
|
|
02-27-2011
|
#7 | |
Join Date: Apr 2006
Location: Ideho
Posts: 2,647
|
Re: Pulled the Radio out of my dash for repair
Quote:
|
|
|
|
|
|
02-27-2011
|
#8 |
|
Join Date: Apr 2010
Location: Aberdeen, SD
Posts: 24
|
Re: Pulled the Radio out of my dash for repair
Thanks for pointing that out to me Hammer. That's all I need is another comedian.
 Maybe you could spare one of the clips in YOUR car. I can probably get by without the clip, but I would just as soon put both of them in when I put the dash back together. I am hoping that now that I have posted a picture of the remaining one that I have, that someone will possibly have one. The fact that there are none left in inventory where I have looked tells me that it is not uncommon to lose this part back behind the dash. Wish me luck
|
|
|
|
|
02-27-2011
|
#9 |
|
Join Date: Apr 2006
Location: Ideho
Posts: 2,647
|
Re: Pulled the Radio out of my dash for repair
I would think asking Dr. Don if he has one would be your best bet at this point. Again, good luck.
|
|
|
|
|
02-27-2011
|
#10 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
Re: Pulled the Radio out of my dash for repair
short of taking out the console....maybe buy a non-ZR-1 replacement face trim plate and scavenge the clip? I think the places like Ecklers, corvette central and Zip sell the regular trim plates.
Not trying to be a wise guy.   Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
 |
|
|
Linear Mode
