ZR-1 Net Registry Forums

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Parts For Sale / Wanted (http://zr1.net/forum/forumdisplay.php?f=10)
-   -   Pulled the Radio out of my dash for repair (http://zr1.net/forum/showthread.php?t=14061)

Z FOR 2 02-27-2011 12:21 AM

Pulled the Radio out of my dash for repair
 
The CD player in my radio has not worked since I purchased my car. I pulled the radio out to send to Doctor Dons for a check-up and repair. Unfortunately, when I was taking the radio cover off, I dropped one of the spring clips that hold the plastic cover to the dash. I think it dropped down along the center console, but am not exactly sure where. I only heard it twang when I pulled the plastic radio cover off. I have not been able to find it or to fish it out with my flexible magnet.

I tried to find another, but, am told the spring clip is no longer available from GM or from any other place I have looked.

Does anyone know where I can find the clip (GM part # 10175544). It will be helpful when the radio comes back if I can reassemble the plastic radio cover with the correct spring clip. :cry:

carter200 02-27-2011 12:37 AM

Re: Pulled the Radio out of my dash for repair
 
Try Jerry he has a few parts ;) http://www.jerrysgaskets.com

Pete 02-27-2011 12:40 AM

Re: Pulled the Radio out of my dash for repair
 
ACE Hardware has them.

Pete

GOLDCYLON 02-27-2011 12:54 AM

Re: Pulled the Radio out of my dash for repair
 
Quote:

Originally Posted by Pete (Post 109095)
ACE Hardware has them.

Pete


Do tell Pete, Do you have a part number or know what to ask the Ace person for?

Pete 02-27-2011 01:18 AM

Re: Pulled the Radio out of my dash for repair
 
I don't have part # but if you take a clip with to show.
They might not be OE,they work and cheap.

Pete

Z FOR 2 02-27-2011 06:02 PM

Re: Pulled the Radio out of my dash for repair
 
http://api.photoshop.com/v1.0/accoun...itions/256.jpg

This is a picture of the clip I need to finish installing the radio cover plate on my dash. The clip is 1-1/2" long, 1/2" wide and the spring is 1/8" deep. I have asked two body shops and they don't have anything like this.

The small end has teeth on it and slides into a hole in the plastic cover plate to hold it firm. The large end snaps into a square hole in the dash.

I will try Doctor Dons tomorrow.

I hope someone has an idea where I can find one. :dancing

Hammer 02-27-2011 07:14 PM

Re: Pulled the Radio out of my dash for repair
 
Quote:

Originally Posted by Z FOR 2 (Post 109190)
http://api.photoshop.com/v1.0/accoun...itions/256.jpg

This is a picture of the clip I need to finish installing the radio cover plate on my dash. The clip is 1-1/2" long, 1/2" wide and the spring is 1/8" deep. I have asked two body shops and they don't have anything like this.

The small end has teeth on it and slides into a hole in the plastic cover plate to hold it firm. The large end snaps into a square hole in the dash.

I will try Doctor Dons tomorrow.

I hope someone has an idea where I can find one. :dancing

You can find one in your car!!! Sorry, couldn't help it Jerry. good luck.

Z FOR 2 02-27-2011 08:12 PM

Re: Pulled the Radio out of my dash for repair
 
Thanks for pointing that out to me Hammer. That's all I need is another comedian. :p Maybe you could spare one of the clips in YOUR car. ;)

I can probably get by without the clip, but I would just as soon put both of them in when I put the dash back together.

I am hoping that now that I have posted a picture of the remaining one that I have, that someone will possibly have one. The fact that there are none left in inventory where I have looked tells me that it is not uncommon to lose this part back behind the dash.

Wish me luck :dancing

Hammer 02-27-2011 09:06 PM

Re: Pulled the Radio out of my dash for repair
 
I would think asking Dr. Don if he has one would be your best bet at this point. Again, good luck.

tomtom72 02-27-2011 09:29 PM

Re: Pulled the Radio out of my dash for repair
 
short of taking out the console....maybe buy a non-ZR-1 replacement face trim plate and scavenge the clip? I think the places like Ecklers, corvette central and Zip sell the regular trim plates.

Not trying to be a wise guy. :o

:cheers:
Tom


All times are GMT -4. The time now is 01:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025