Some Differences between 95's and 90'/91's

[Dynomite]

Originally Posted by Jagdpanzer

The drain tube actually runs between the back of the block/oil pan and in front of the flywheel.

Valley Drain Port looks larger on 95' and goes from Valley into Bell Housing in front of Flywheel and then out with a large port in the Bell Housing Lower Cover plate (shown in photo looking upward in front of Bell Housing Lower Cover Plate and behind Rear of Oil Pan). No tube extends down as the Drain Port appears too large for a tube.

I actually applied engine degreaser and pressure washed the valley and the Larger Drain Port functions very well. I think if the Valley Drain Port on the 95' is not clogged with leaves that one could actually pressure wash the engine with no issues. I will add a photo of the Valley in a moment.

Valley with New Crankcase Cover Gasket installed