05-12-2020 | #1 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,093
|
Reminiscing
I was going through some old car photos and came across a bunch from a September 2014 trip to Mercury Marine (actually Mercury Racing) in Fon Du Lac Wisconsin. So I thought I would share a few here. It was a great trip and I would hope it could be done again. We brought I believe 10 ZR-1s carrying 13 folks (as far as I can tell from the pics). It was an especially moving visit because the folks at Mercury were so excited about the heritage of the ZR-1 and their involvement. They treated us to a tour of their factory (not the much bigger main plant), a big barbecue lunch and a car show that included not only our 10 ZR-1s but lots of cars owned by Mercury employees. We also got a tour of the Mercury Outboards museum, which showcases Mercury's history of outboard motors and also houses their '95 Black ZR-1 in the middle of the floor. We had a little ceremony in which we presented them with one of Lee (lgaff) Gaffigan's fine MAP sensor covers with the serial number of their '95 (Can't recall the actual number but I am sure someone can find it). Enjoy --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
05-12-2020 | #2 |
Join Date: Dec 2019
Location: st louis mo
Posts: 749
|
Re: Reminiscing
very cool
|
05-12-2020 | #3 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,093
|
Re: Reminiscing
More pics. I especially liked the museum because I grew up with Mercury outboards. In my early teens I was a Mercury mechanic and we had a boat club in which everyone had Mercurys. Had a shop in my basement where I worked on them. Had an early 13' Boston Whaler with a 50 HP Merc on it. Actually more than one. Broke the transoms on three jumping waves at full throttle and the Boston Whaler company replaced each one saying it was bad advertising for them. But after three they said this is the last one. I then made some big mahogany braces for the transom corners and never had a problem again. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
05-12-2020 | #4 |
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
|
Re: Reminiscing
13 foot Whalers with a 50 Merc are/were crazy!!!
Rated for 40hp, they’d go over backwards on occasion! Wake jumping can be fun but you better “stick” the landing... Merc outboards sound great when at full throttle and airborne! |
05-13-2020 | #5 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Reminiscing
Yeah, I remember that trip. Being this is an anniversary year, it would be nice if we could arrange a "re-do", provided this virus mayhem subsides in time (thinking maybe this fall????).
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
05-13-2020 | #6 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,093
|
Re: Reminiscing
You know your boats and motors. I spent my teenage years living on the water of Long Island Sound. On a calm day I could hear outboards running out in the Sound and could always differentiate between an Evinrude or a Mercury. With the 50 I could hit 40 mph--a big deal back in the '60s. On a rough day or in the wake of a big ship we could get the bow about 10' up and the prop about 2 feet out of the water. If there was a headwind you could definitely flip. I never flipped but came close a few times. Lots of fun for a teenager. Now they probably put 200 hp motors on a 13' foot Whaler! We also played around with a Merc 20H on a small hydro and on a 9' Skimmar dingy. Once tried a 35 HP Johnson on the Skimmar and it almost sank from the weight in the rear. Those were the days... --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
05-13-2020 | #7 |
Join Date: Apr 2018
Location: New Jersey
Posts: 29
|
Re: Reminiscing
Brings back many memories—I had a friend in the mid 1980s with a 13 foot Whaler and 40hp Mercury outboard—super fast on a flat days in Barnegat Bay NJ.
Sent from my iPhone using ZR-1 Net Registry |
05-13-2020 | #8 |
Join Date: Sep 2017
Location: Twin Cities, MN
Posts: 125
|
Re: Reminiscing
Thanks for sharing the photos!
__________________
1967 Corvette convertible, L79, 4 speed, red / black / white top 1994 Corvette ZR-1, white / black NCRS North Central Chapter Judging Chairman |
05-14-2020 | #9 |
Join Date: Jul 2012
Location: Allentown, PA
Posts: 309
|
Re: Reminiscing
And, interestingly, Mercury now builds outboards as well as crate engines based on the LT5 DOHC architecture. The Heart of the Beast lives on!20200503_155619.jpg
Sent from my SM-G975U1 using ZR-1 Net Registry mobile app
__________________
'95 ZR-1, aqua/gray, #167 368 LPE/Haibeck, Web cams, Stainless Works headers, B&B Fusion exhaust, 18" Fikse wheels, Alcon brakes, lowered. 491 SAE RWHP. |
05-14-2020 | #10 |
Join Date: Jun 2015
Location: Texas
Posts: 530
|
Re: Reminiscing
Oh man the memories, our first boat was a 19ft AMF Slickcraft with twin 115hp mercs. Yeah it would pull a wheelie and it got you offshore quick. We did crack the hull though by not sticking the landing.
|
|
|