custom fuel rails and relief valve - ZR-1 Net Registry Forums

tpepmeie · 02-25-2017

Fuel rails and new pressure relief valve are done. The valve is adjustable, and I have it set to 75psi.

The rails have -8 (1/2") inlets, and .685" ID.

tpepmeie · 05-11-2018

So appears photobucket blocks my previous photos.

Anyway, here are the newest ones. Black powder coat done, and rails & regulator installed.

IMG_0096.JPG

IMG_0094.JPG

Sent from my iPhone using ZR-1 Net Registry

HAWAIIZR-1 · 05-11-2018

WOW!!!!

Sent from my iPhone using ZR-1 Net Registry

tpepmeie · 09-21-2020

New injectors. Trying to cut down the duty cycle % for 800bhp on E85. These are new Bosch, at 75 psi will flow nearly 47 lbs/hr. That should be enough.

IMG_1212.JPG

Sent from my iPhone using ZR-1 Net Registry

02-25-2017	#1
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 809	custom fuel rails and relief valve Fuel rails and new pressure relief valve are done. The valve is adjustable, and I have it set to 75psi. The rails have -8 (1/2") inlets, and .685" ID. __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

05-11-2018	#2
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 809	Re: custom fuel rails and relief valve So appears photobucket blocks my previous photos. Anyway, here are the newest ones. Black powder coat done, and rails & regulator installed. IMG_0096.JPG IMG_0094.JPG Sent from my iPhone using ZR-1 Net Registry __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development

05-11-2018	#3
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,566	Re: custom fuel rails and relief valve WOW!!!! Sent from my iPhone using ZR-1 Net Registry __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048

09-21-2020	#4
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 809	Re: custom fuel rails and relief valve New injectors. Trying to cut down the duty cycle % for 800bhp on E85. These are new Bosch, at 75 psi will flow nearly 47 lbs/hr. That should be enough. IMG_1212.JPG Sent from my iPhone using ZR-1 Net Registry __________________ Todd ____________________________________ *** our email address has changed! info@pepmeierengines.com pepmeierengines.com Friend us on Facebook too: www.facebook.com/profile.php?id=100011443683384 Pepmeier Engine Development Last edited by tpepmeie; 09-21-2020 at 06:55 PM.