|
05-03-2015
|
#1 |
 Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
Wtd: Short harness to Driving Light
Where is the best place to get the small plug-in wire that goes to my left driving light from the main headlight harness?
It's two wires, connectors on each end (one goes to bulb) and about a foot long. Dealership? Salvage? Corvette vendor? Anyone here? Mine is missing completely. I can post a pic if it helps. Thanks very much. PS. Sorry for asking here rather than searching myself. I'm thrashing for C4 Gathering.
__________________
Russ McBride, [COLOR="Red"]Car Sold 8/2020[/COLOR] #1635, Marietta, GA USA, 1991 ZR-1, #766 (bought 1/1/2015) MS3-Pro, OBX, SW X-Pipe, Borla, Hurst, SLP, Goodyear F1 GS-D3, Kenwood. HOTB 2016Q3 [IMG]http://zr1.net/forum/picture.php?albumid=316&pictureid=2873[/IMG] [IMG]http://zr1.net/forum/picture.php?albumid=336&pictureid=2985[/IMG] |
|
|
|
05-03-2015
|
#2 |
 Join Date: Oct 2004
Posts: 1,889
|
Re: Wtd: Short harness to Driving Light
Considering your situation I'd take the one that you have and just purchase two connectors and go with it. You shouldn't have any issues with the connectors or pig-tails.
GM # 12090370 is the harness and there's a few for real cheap on eBay. That might be very quick. Keep putting together and that would be a "last minute" plug-in and go thing. |
|
|
|
|
05-03-2015
|
#3 |
|
Join Date: Jan 2015
Location: Marietta, GA USA
Posts: 1,160
|
Re: Wtd: Short harness to Driving Light
Thank you!
__________________
Russ McBride, [COLOR="Red"]Car Sold 8/2020[/COLOR] #1635, Marietta, GA USA, 1991 ZR-1, #766 (bought 1/1/2015) MS3-Pro, OBX, SW X-Pipe, Borla, Hurst, SLP, Goodyear F1 GS-D3, Kenwood. HOTB 2016Q3 [IMG]http://zr1.net/forum/picture.php?albumid=316&pictureid=2873[/IMG] [IMG]http://zr1.net/forum/picture.php?albumid=336&pictureid=2985[/IMG] |
|
|
|
 |
|
|
Linear Mode
