ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 07-29-2014   #1
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Just got my Z back from Bill Boudreau...

Took it to him for several projects, including installing OBX headers, Corsa exhaust, new silicone hoses, rebuilt tensioner from Marc, a new rear spring and one of his signature shifters. He also modified my thermostat to run cooler and relocated the MAT sensor and replaced a bunch of hardened hoses and lines under and around the plenum.

My impressions of Bill:

Perfectionist. Highly-detailed and treated my car like it belonged to him. He detailed my plenum and cam covers at no charge and they look great. He hand-washed the car before I went to pick it up. He filled the car with premium and did not charge me for it. He took his sweet time with it; the job took MUCH longer than I originally thought and I became frustrated at times. BUT, it was well worth it in the end. He’s a great guy and I will take my car to him whenever it needs anything more complicated than an oil change. I HIGHLY recommend him.

My impressions of the car:

LOVE the Corsa system; it has a great Jekyll & Hyde thing going on…quiet when I want it to be and straight pipe-loud when I don’t. Just took it out and beat the hell out of it for 20 minutes in 107 degree heat and the coolant gauge never exceeded an indicated 170ish. Bill’s shifter is AMAZING! So direct and positive! I can’t believe how much slop there is in the stock unit; I thought the new one was broken at first, it felt so different. It ain’t broken! If I had it to do over again, I would have installed cats. Not because I care about my 2K per year car hurting the atmosphere or even because I care about the smell in the AIR, but after my quick drive I walked into the house and my clothes smelled like a garage! It’s like hanging out in a smoky bar for an hour and I didn’t expect that nasty side effect. Lastly, the car is very, very fast but honestly, I’m having a hard time sensing a SOTP difference going from stock manifolds/straight pipes to OBX headers/Corsa, even though I had Marc’s chip calibrated for the change. Surprising indeed.
KILLSHOTS is offline   Reply With Quote
Old 07-29-2014   #2
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Re: Just got my Z back from Bill Boudreau...

Good to hear your up & running & happy, come on OCT.
PhillipsLT5 is offline   Reply With Quote
Old 07-29-2014   #3
Racinfan83
 
Join Date: Apr 2013
Location: Eastern Missouri
Posts: 773
Default Re: Just got my Z back from Bill Boudreau...

Keep in mind the smell will probably go away - you drove it with new headers, pipes, etc and all the "new" has to burn off...
__________________
[LEFT][SIGPIC][/SIGPIC][/LEFT]
[CENTER][COLOR=Indigo][SIZE=4][I][B] **Now Sold** 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]
Racinfan83 is offline   Reply With Quote
Old 07-29-2014   #4
Blue Flame Restorations
 
Blue Flame Restorations's Avatar
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
Default Re: Just got my Z back from Bill Boudreau...

Always good to hear of great work and more PERMAGRIN!!!!!
__________________
1988 KOH Prototype EX5023 sold
1990 ZR-1 #444 Convertible
1990 ZR-1 Black #966
1991 ZR-1 Quazar Blue #296
1957 Duntov SS Project
Blue Flame Restorations is offline   Reply With Quote
Old 07-29-2014   #5
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Just got my Z back from Bill Boudreau...

Quote:
Originally Posted by Racinfan83 View Post
Keep in mind the smell will probably go away - you drove it with new headers, pipes, etc and all the "new" has to burn off...
Yep and Bill installed my used corsa system I bought from Dom when he picked up a complete system on EBay with a set of Watson headers. Chris did you get you headers coated as recommended?

I added hi flow Magna flow cats as well
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 07-29-2014   #6
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: Just got my Z back from Bill Boudreau...

Quote:
Originally Posted by Racinfan83 View Post
Keep in mind the smell will probably go away - you drove it with new headers, pipes, etc and all the "new" has to burn off...
I hope you're right...it already has about 100 break-in miles on it. My fingers are crossed that this is going to go away.
KILLSHOTS is offline   Reply With Quote
Old 07-29-2014   #7
KILLSHOTS
 
Join Date: Feb 2014
Location: AZ
Posts: 860
Default Re: Just got my Z back from Bill Boudreau...

Quote:
Originally Posted by GOLDCYLON View Post
Yep and Bill installed my used corsa system I bought from Dom when he picked up a complete system on EBay with a set of Watson headers. Chris did you get you headers coated as recommended?

I added hi flow Magna flow cats as well
Sure did, D. Had them coated by a local company. Called the J-H company and found out that their Phoenix branch closed 2 years ago. Called around and most local companies seemed flaky, found one good one and his price was EXCELLENT! Saw his work, it looked great. Talked further, found out he was the J-H coater until they closed down! Coated inside and out and they look great. Bill thought he was going to have to dimple the driver side at first and he said he couldn't even get it to heat up with a torch!
KILLSHOTS is offline   Reply With Quote
Old 07-29-2014   #8
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Re: Just got my Z back from Bill Boudreau...

You can always add cats later, Bill had told me about the smell so I went with
Random Technology
PhillipsLT5 is offline   Reply With Quote
Old 07-29-2014   #9
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Re: Just got my Z back from Bill Boudreau...

Quote:
Originally Posted by KILLSHOTS View Post
Took it to him for several projects, including installing OBX headers, Corsa exhaust, new silicone hoses, rebuilt tensioner from Marc, a new rear spring and one of his signature shifters. He also modified my thermostat to run cooler and relocated the MAT sensor and replaced a bunch of hardened hoses and lines under and around the plenum.

My impressions of Bill:

Perfectionist. Highly-detailed and treated my car like it belonged to him. He detailed my plenum and cam covers at no charge and they look great. He hand-washed the car before I went to pick it up. He filled the car with premium and did not charge me for it. He took his sweet time with it; the job took MUCH longer than I originally thought and I became frustrated at times. BUT, it was well worth it in the end. He’s a great guy and I will take my car to him whenever it needs anything more complicated than an oil change. I HIGHLY recommend him.

My impressions of the car:

LOVE the Corsa system; it has a great Jekyll & Hyde thing going on…quiet when I want it to be and straight pipe-loud when I don’t. Just took it out and beat the hell out of it for 20 minutes in 107 degree heat and the coolant gauge never exceeded an indicated 170ish. Bill’s shifter is AMAZING! So direct and positive! I can’t believe how much slop there is in the stock unit; I thought the new one was broken at first, it felt so different. It ain’t broken! If I had it to do over again, I would have installed cats. Not because I care about my 2K per year car hurting the atmosphere or even because I care about the smell in the AIR, but after my quick drive I walked into the house and my clothes smelled like a garage! It’s like hanging out in a smoky bar for an hour and I didn’t expect that nasty side effect. Lastly, the car is very, very fast but honestly, I’m having a hard time sensing a SOTP difference going from stock manifolds/straight pipes to OBX headers/Corsa, even though I had Marc’s chip calibrated for the change. Surprising indeed.
SOTP dyno not accurate, time for dyno for a baseline now before more mods
PhillipsLT5 is offline   Reply With Quote
Old 07-29-2014   #10
RICKYRJ1
 
RICKYRJ1's Avatar
 
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
Default Re: Just got my Z back from Bill Boudreau...

I have no cats and no smell ever, 1st I have heard of that. Glad to hear a positive review enjoy
RICKYRJ1 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020