ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 01-04-2014   #1
John Boothby
 
John Boothby's Avatar
 
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
Default Vac pump behind glove box

What is the vac pump behind glove box? Looked in the FSM but didn't see anything. I imagine it has to do with the HVAC doors, but not sure.

With the key on, mine will come on for a few seconds then go off then come on again. Keeps repeating. Vac leak somewhere?


Thanks
__________________
JB
1990 #148 Red/Saddle
Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice
:cheers:
John Boothby is offline   Reply With Quote
Old 01-04-2014   #2
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: Vac pump behind glove box

Pretty sure that the pump you're hearing is the pump under the right headlight.

Depending on the cycling frequency, you probably do have a vacuum leak somewhere in the secondarys' vacuum system.
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 01-04-2014   #3
John Boothby
 
John Boothby's Avatar
 
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
Default Re: Vac pump behind glove box

No, it's not the secondary pump behind the headlight, it is definitly behind the firewall behind the glove box. I remember reading about it before, but I can't remember what it was for.
__________________
JB
1990 #148 Red/Saddle
Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice
:cheers:
John Boothby is offline   Reply With Quote
Old 01-06-2014   #4
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Vac pump behind glove box

Well????......what is it

Are you or anyone checking out the Consumer Technology Trade Show in Las Vegas Jan 7-10, 2014? Consumer Technology Trade Show

Last edited by Dynomite; 01-06-2014 at 11:15 AM.
Dynomite is offline   Reply With Quote
Old 01-06-2014   #5
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: Vac pump behind glove box

Maybe you're referring to the HVAC vac-to-temp door CONNECTOR?

This is for '90...

__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Old 01-06-2014   #6
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Vac pump behind glove box

That is some good stuff there Schrade. Thanks for
Photos
Dynomite is offline   Reply With Quote
Old 01-06-2014   #7
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: Vac pump behind glove box

Quote:
Originally Posted by Dynomite View Post
That is some good stuff there Schrade. Thanks for
Photos
Sure thing!

JB has my curiousity tweaked here now (always is tho'). What's he referring to???


ed.:
You got any snappics posted up, of that gizmo there Cliff? It whupped me on vac diagnostics. Where is Encyclopedia Dynomatica
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

Last edited by Schrade; 01-06-2014 at 01:06 PM.
Schrade is offline   Reply With Quote
Old 01-06-2014   #8
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: Vac pump behind glove box

Quote:
Originally Posted by Schrade View Post
Sure thing!

JB has my curiousity tweaked here now (always is tho'). What's he referring to???


ed.:
You got any snappics posted up, of that gizmo there Cliff? It whupped me on vac diagnostics. Where is Encyclopedia Dynomatica
Beyond my experience as I have had the evaporator on the other side of the fire wall all apart but not the HVAC stuff which is interesting there are not more issues with all those vacuum actuators

I always was curious where that HVAC vacuum line connected to the passenger side Plenum went in addition to cruise control
I keep thinking I have to get me one of those manuals but then you take photos of everything I ever need

Last edited by Dynomite; 01-06-2014 at 01:48 PM.
Dynomite is offline   Reply With Quote
Old 01-06-2014   #9
John Boothby
 
John Boothby's Avatar
 
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
Default Re: Vac pump behind glove box

Quote:
Originally Posted by Schrade View Post
Maybe you're referring to the HVAC vac-to-temp door CONNECTOR?

This is for '90...

I think that is it. I remember reading something about it some years ago, but I guess I didn't look hard enough.

I just turned the key on and the secondary vac pump ran a couple seconds as usual and this HVAC pump ran maybe 30 seconds to a minute longer and went off. I listend for a couple more minutes and nothing, so I don't think I have a problem.

Thanks much for the reply!! This is what this forum is all about! Great to know someone will have the answer!!

John
__________________
JB
1990 #148 Red/Saddle
Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice
:cheers:
John Boothby is offline   Reply With Quote
Old 01-06-2014   #10
Schrade
 
Join Date: Dec 2012
Location: NC
Posts: 1,786
Default Re: Vac pump behind glove box

Quote:
Originally Posted by John Boothby View Post
I think that is it. I remember reading something about it some years ago, but I guess I didn't look hard enough.

I just turned the key on and the secondary vac pump ran a couple seconds as usual and this HVAC pump ran maybe 30 seconds to a minute longer and went off. I listend for a couple more minutes and nothing, so I don't think I have a problem.

Thanks much for the reply!! This is what this forum is all about! Great to know someone will have the answer!!

John

I think if there's something running in there Mr B., then something might be wrong. I don't think it's a pump of any sort, is it? Anybody?

With some hesitation problem here of my own, and a rare blinking light on the A/C control (only happened twice @ re-assembly, and hasn't happened again), AND I wasn't able to confirm vacuum integrity in the HVAC vac supply line, I'm wanting to know a little more here too.

I did the diagnostic button-pushing in the A/C control head, and got no codes. But the light didn't blink for no reason.

Try yours, and see what you get.



__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads...

( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b]

Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc...

1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3"

[IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]
Schrade is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:30 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020