Any interest in door sill protectors? - ZR-1 Net Registry Forums

Z51JEFF · 08-08-2013

I made a few sets of these a few years ago and a few people have shown some interest in buying a pair.I would have to buy a 4 by 8 foot sheet of aluminum,pay the water jet owner to cut the out,finish the piece and ship each set in a PVC tube for protection.The ZR-1 logo I had made years ago,I have a few sets left but none to sell to Id have to get these made as well.Id be looking at selling a set of these for between $40-$60 a set finished ready to put in your car.The friend that put me in touch with the water jet owner years ago estimated I could get between 15 to 20 sets out of the sheet of aluminum.If enough people want a set of these Ill see about getting it done.The ZR-1 logo colors at this point would be an option Id look into,once the logo maker has the program its just a matter of changing out the color of the film in the machine to the next color.These are brushed aluminum.Ill get the car outside in a day or 2 and get some better pictures.[IMG]

[/IMG][IMG]

[/IMG]

Dynomite · 08-08-2013

Interested in two sets

HAWAIIZR-1 · 08-10-2013

I'm definitely interested in a set!!!

Thanks!!

PhillipsLT5 · 08-11-2013

What holds them in place?

Z51JEFF · 08-12-2013

Quote:

Originally Posted by PhillipsLT5

What holds them in place?

3M Pressure Sensitive Tape -PST-,the same stuff used on side trim.Ive gottin a few PMs about making these,I need 15 sets in order for this to work.Ill pull the car out of the garage and get some better pictures in a day or 2.

Fully Vetted · 08-12-2013

Count me in. Those should look pretty good with the sill protectors I'm having made.

RyanChappel · 08-12-2013

They look good.

tf95ZR1 · 08-12-2013

Interested. Price range?

PhillipsLT5 · 08-12-2013

I am interested, Ted it says 40 to 60 for set

Torchred96 · 08-12-2013

Definitely! Let me know where to paypal.

08-08-2013	#1
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	Any interest in door sill protectors? I made a few sets of these a few years ago and a few people have shown some interest in buying a pair.I would have to buy a 4 by 8 foot sheet of aluminum,pay the water jet owner to cut the out,finish the piece and ship each set in a PVC tube for protection.The ZR-1 logo I had made years ago,I have a few sets left but none to sell to Id have to get these made as well.Id be looking at selling a set of these for between $40-$60 a set finished ready to put in your car.The friend that put me in touch with the water jet owner years ago estimated I could get between 15 to 20 sets out of the sheet of aluminum.If enough people want a set of these Ill see about getting it done.The ZR-1 logo colors at this point would be an option Id look into,once the logo maker has the program its just a matter of changing out the color of the film in the machine to the next color.These are brushed aluminum.Ill get the car outside in a day or 2 and get some better pictures.[IMG][/IMG][IMG][/IMG]

08-08-2013	#2
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,797	Re: Any interest in door sill protectors? Interested in two sets __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS

08-10-2013	#3
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,582	Re: Any interest in door sill protectors? I'm definitely interested in a set!!! Thanks!! __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048

08-11-2013	#4
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: Any interest in door sill protectors? What holds them in place?

08-12-2013	#6
Fully Vetted Join Date: Sep 2012 Location: Rockwall, Tx Posts: 1,510	Re: Any interest in door sill protectors? Count me in. Those should look pretty good with the sill protectors I'm having made. __________________ _________________ 1994 AB/Grey #141 430 RWHP/392 RWTQ FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener BBC - Bling By Carter: Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover

08-12-2013	#7
RyanChappel Join Date: Aug 2012 Location: Boone County, Indiana Posts: 132	I will buy a set.... They look good.

08-12-2013	#8
tf95ZR1 Join Date: Aug 2005 Location: Northridge, CA Posts: 1,461	Re: Any interest in door sill protectors? Interested. Price range?

08-12-2013	#10
Torchred96 Join Date: Jul 2011 Location: Homestead, Fl Posts: 248	Re: Any interest in door sill protectors? Definitely! Let me know where to paypal. __________________ Sam 1991 ZR-1 :salute: