Header install this Saturday - ZR-1 Net Registry Forums

ZZZZZR1 · 02-28-2011

hey Wazoo,

Last minute install this saturday @ George Braml's home in Kingsville, MD (near White Marsh off 95).

Anyone interested I can PM them address and or directions.

We will start early (9am)

Looking forward to another Wazoo Maintenance day!

David

ZR1@gmx.com · 02-28-2011

Hey Dave, I would love to join you guys but the car is in the shop!

If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

Scrrem · 02-28-2011

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

secondchance · 03-01-2011

David,

Like I said I will be on the road this Saturday - somewhere between Cleveland and DC.

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

ZZZZZR1 · 03-01-2011

Quote:

Originally Posted by ZR1@gmx.com

Hey Dave, I would love to join you guys but the car is in the shop!

If you could shoot any photos and share some tips and tricks it will be greatly appreciated!
Thanks,
Kevin

Kevin

Absolutely!!!

David

ZZZZZR1 · 03-01-2011

Quote:

Originally Posted by Scrrem

David,
I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address.
Rich

PM sent

Scrrem · 03-01-2011

Quote:

Originally Posted by secondchance

Rich,
Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes.

One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

Yun,You know it. I will also bring along my custom fabricated 8 MM wrench for those tight places.I guess I was so busy running to the parts store, I missed all the fun you and Jim were having on the drivers side.Rich

QB93Z · 03-02-2011

I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA.

Good Luck George!

Jim

LT5-1935 · 03-03-2011

Quote:

Originally Posted by QB93Z

I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA.

Good Luck George!

Jim

Thanks Jim see ya at the next WMD

ZZZZZR1 · 03-04-2011

New z owner is coming by to meet some Wazoo about 10am

Anyone else interested in coning by to help or just meet post up

Or PM me

David

02-28-2011	#1
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Header install this Saturday hey Wazoo, Last minute install this saturday @ George Braml's home in Kingsville, MD (near White Marsh off 95). Anyone interested I can PM them address and or directions. We will start early (9am) Looking forward to another Wazoo Maintenance day! David

02-28-2011	#2
ZR1@gmx.com Join Date: Oct 2010 Location: Sedalia, MO Posts: 150	Re: Header install this Saturday Hey Dave, I would love to join you guys but the car is in the shop! If you could shoot any photos and share some tips and tricks it will be greatly appreciated! Thanks, Kevin __________________ Fun 91 #303

02-28-2011	#3
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,469	Re: Header install this Saturday David, I am still putting mine back together but I could spare a few hours to lend a hand. Shoot me the address. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

03-01-2011	#4
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,710	Re: Header install this Saturday David, Like I said I will be on the road this Saturday - somewhere between Cleveland and DC. Rich, Don't forget to practice Dr. Phil's "teeth and string" trick. After your header install, WAZOO will not accept anything but 32 bolts in the holes. One method I discussed with Jim is cut the tough to get to holes on the flange in such a way that these bolts, second row from the front, bottom, are screwed in first except for 3/8" or so. With the flange cut, headers can be slipped on followed by the remaining bolts screwed in. This may avoid 2 hours per bolt for these 2 bolts.

03-02-2011	#8
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,687	Re: Header install this Saturday I am sorry that I will not be able to attend. I will be at an antique show in Chantilly VA. Good Luck George! Jim

03-04-2011	#10
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: Header install this Saturday New z owner is coming by to meet some Wazoo about 10am Anyone else interested in coning by to help or just meet post up Or PM me David