01-06-2011 | #1 |
Join Date: Nov 2010
Location: Dallas, TX
Posts: 198
|
Need to figure out this seat control thingie
There is a part missing from my center console and I can't figure out what to even call it to start searching for a replacement.
Take a look at the piccy - see on the passenger side to the left of the button/switch, there's a "hole"? The driver side has a little triangle plastic piece that goes there. Anybody have some ideas? (Or better yet, a spare triangle thingie?)
__________________
[B]1990 Corvette ZR-1 (#1930) Red/Black, Stock Engine, Henderson Performance custom ECM, FIC Injectors, B&B exhaust, Kenwood DNX6160[/B] Other Rides: 1992 Pontiac Firehawk (#010), 1967 Pontiac GTO 1998 Porsche 968, 2000 Harley Davidson FXST 1986 Pontiac Trans Am, 1931 Ford Model A Tudor Deluxe |
01-06-2011 | #2 | |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Need to figure out this seat control thingie
Quote:
They are still availalbe from GM I have no idea what GM calls them but I think I have the part numbers at home somewhere
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
01-06-2011 | #3 |
Join Date: Dec 2003
Location: Grand Island NE
Posts: 1,512
|
Re: Need to figure out this seat control thingie
INSERT P/SEAT ADJR SW PLT (TRIANGLE SHAPED)
Part number 12514823
__________________
Dennis Fierstein 90 ZR-1 #2562 Atomic-Z ZR-1 Net Registry Chairman of the Board ZR-1 Net Registry Treasurer |
01-06-2011 | #4 |
Join Date: Apr 2010
Location: O'Fallon, Mo
Posts: 738
|
Re: Need to figure out this seat control thingie
good lord, is there a part number for ANYTHING on this car you guys don't have? One of the reasons I enjoy this site, people have actual useful knowledge. I should say almost all, we all know Keith is kind of worthless. Itlgo2 is just a reference to whats in his depends
|
01-06-2011 | #5 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: Need to figure out this seat control thingie
I thought the "thingy" was available from the major corvette catalogs
|
03-25-2011 | #6 |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: Need to figure out this seat control thingie
Any chance you'd have the part # for the left-hand one?
Thanks, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
03-26-2011 | #7 |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: Need to figure out this seat control thingie
Be careful when you vacuum your interior, they do not sit in there very tightly and can get sucked out.
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
03-26-2011 | #8 |
Join Date: Apr 2008
Location: Gainesville GA
Posts: 231
|
Re: Need to figure out this seat control thingie
They are available at Corvette Central, part # 484510. It cost $15.95 for a pair.
__________________
1991 ZR1, White/Red. |
03-28-2011 | #9 | |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: Need to figure out this seat control thingie
Quote:
Excellent, thanks much. At that price it's not worth standing at the GM parts counter. Having that got them the order for a few other seeks - a sawbuck's worth. I had tried to get them from White Racing Products but their checkout didn't work with my browser and they didn't respond to their contact form. They had them, at ~$35. EACH. Thanks again, that's a big help. Of course when I pull the seats and everything at some point I'll probably find the old one - now it's guaranteed. Best, - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
03-28-2011 | #10 |
Join Date: Oct 2010
Location: Sedalia, MO
Posts: 150
|
Re: Need to figure out this seat control thingie
Mine was missing both triangle thingies when I got it... Did not even know what I was missing till now... Still not sure, do the thingies serve a purpose or are they just for looks???
__________________
Fun 91 #303 |
|
|