![]() |
#1 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
My siamesed ported heads are almost done, but I need 1 intake guide.....are these easy to find or are Jerry's OEMs the only ones out there?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 10-18-2010 at 08:47 PM. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
![]()
Lee,i have a sh!t load come and get one.
They are used so are the one's that are in your Z ![]() Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Sep 2005
Location: Washington
Posts: 955
|
![]()
Lee do they look like these
![]() |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
More like this:
![]() ![]() ![]() Bought them like this......the alum is residual from intake porting. The guy cut the IH gasket surface thin, shop is fixing it
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 10-18-2010 at 10:22 PM. |
![]() |
![]() |
![]() |
#5 |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]()
Wow...Now Polo's look more like what one might expect to see in a big inch race motor - siamesed and both ports opened to the "max". However, one port maxed and one port small...AND siamesed...
![]() Are you going to leave them "as is", or are you going to open the primary side up a bit? Did you buy the IH that went along with the heads?? I'd be interested to see what the porting looked like on the IH outlets that goes w/ those heads. P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
![]() |
![]() |
![]() |
#6 |
Join Date: Aug 2005
Location: Fishers, IN
Posts: 811
|
![]()
Interesting approach. Why did you chose that side to "flatten out" / open up? It isn't the side which needs the help... the other side is where the short side of the severe angle is at the I/H.
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
I bought them that way, will see what they do. They are plenty big vs stock on a 350 motor I would think. Considering I got them for next to nothing, worth the chance.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
![]()
Stopped by to check on the progress of the heads, they look awesome....IH mating surface has been restored, might have them flow tested.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#9 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,697
|
![]() |
![]() |
![]() |
![]() |
#10 | |
![]() ![]() Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
![]() Quote:
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
![]() |
![]() |
![]() |
|
|