![]() |
#1 |
![]() Join Date: Nov 2013
Location: ..
Posts: 693
|
![]()
Hello,
does anybody know what the rear wheel offset is for a zr1. I bought 17/11 rears and they sent them for a regular corvette. I cant seem to find any for a original zr1 so I am wondering if adding a spacer would make it work. The salesman made a mistake when he sold me these wheels but I cant seem to find any that actually have a zr1 offset amold that are deepdish also. Will a spacer work? the guy at the tire place said get a 1 inch spacer and that should do it. Any help will be appreciated. edramos. |
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
|
![]()
there are no aftermarket deep lug rears on the market. the rear offset is 36mm I believe
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#3 |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,153
|
![]()
36MM is the correct rear offset. 50MM is the rear offset for a Grand Sport
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
![]() |
![]() |
![]() |
#4 | |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]() Quote:
Definitely a NO on the 1" stuff. The fellow who did mine I understand is in poor health these days and isn't near you at all. If I can help at all ask. I know where I'd go if I needed to do them again and my old reliable fellow couldn't do them but maybe you'd rather maybe buy correct wheels. What do you actually have for wheels now? Are you attempting to add "black" GS or just what? Last edited by WVZR-1; 11-25-2013 at 06:43 PM. |
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
![]()
Carter200 on this forum makes the hubcentric spacers you need.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Nov 2013
Location: ..
Posts: 693
|
![]()
14mm is that about 1 inch?? I can get hubcentric billet 1 inch spacers no problem.
|
![]() |
![]() |
![]() |
#7 |
![]() Join Date: Nov 2013
Location: ..
Posts: 693
|
![]()
25 mm in a inch. so 14mm is just a little over half inch spacer. I thought it would be more?
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Nov 2013
Location: ..
Posts: 693
|
![]()
ok I will look around for 18mm hubscentric spacers. thanks.
|
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Nov 2013
Location: ..
Posts: 693
|
![]()
I threw my pitted amolds away today. I thought these would fit but they dont. I am in a pickle and need to make these work. the hubcentric spacers are spacers that mount on your hub with bolts and then you bolt the rims on to them. I dont think I will need new wheel studs just more bolts. I found a company that would make 20mm. Let see if I can find 18mm. I contacted carter200 to see if you can sell me some. thanks for your help. edramos.
|
![]() |
![]() |
![]() |
#10 | |
![]() Join Date: Oct 2004
Posts: 1,889
|
![]() Quote:
Last edited by WVZR-1; 11-25-2013 at 08:44 PM. |
|
![]() |
![]() |
![]() |
|
|