Survey of UK license plates searching for Narrow Bodies - ZR-1 Net Registry Forums

1989ZR1#74 · 06-15-2010

After noting that Keiths 86 and the two 86 prototypes in HOTB have license plates in the same range I decided to see if I could find any more. Using the UK Carfax site Autocheck I began hunting them down. It appears that there were at least 5 Corvettes within +/- 20 license plates.

Here is what I found:

D123FPW Chevrolet Corvette, Red, Manual, 2 Door Saloon, Petrol
D131FPW Chevrolet Corvette, Yellow, Manual, 2 Door Saloon, Petrol
D137FPW Chevrolet Corvette, White, Manual, 2 Door Saloon, Petrol
D138FPW Chevrolet Corvette, Grey, Manual, 2 Door Saloon,Petrol
D142FPW Chevrolet Corvette, Gold, Manual,2 Door Saloon,Petrol

The two bold listings are Corvettes that are unknown.

Eric

Blue Flame Restorations · 06-16-2010

Pretty neat stuff, Eric.

1989ZR1#74 · 06-16-2010

Paid the 24.99BP for 5 reports and came up with some more neat data.

D123 FPW Red, Imported: 08/11/1986, Exported: 07/16/1987 Engine#: LT5006
D131 FPW Yellow, Imported: 10/03/1986, Exported: N/A, Engine#: LT50013
D137 FPW White, Imported: 11/01/1986, Exported: 12/1/1987, Engine#: LT5020
D138 FPW Grey, Imported: 11/01/1986, Exported: 01/01/1987, Engine# LT5021
D142 FPW Gold, Imported 10/16/1986, Exported: N/A, Engine#: LT5018

The narrow bodies were built by Hawtal-Whiting and Lotus. (See HOTB pages 83 to 87) Per HOTB the first 5 "Component Cars" where shipped to Mosport International Raceway in Bowmanville, Ontario, Canada for Testing. I would bet that D139FPW was one of them.

HOTB also states they built 20 to 25 of these "Component Cars" Seeing the Engine numbers on the Autocheck reports would lead one to think this may be true. Now I need those plates numbers to track them down..

1989ZR1#74 · 06-16-2010

Quote:

Originally Posted by Blue Flame Restorations

Pretty neat stuff, Eric.

Thanks Brett, Did EX5023 have a UK registration?

If So do you know what it was? Eric

Blue Flame Restorations · 06-16-2010

Quote:

Originally Posted by 1989ZR1#74

Thanks Brett, Did EX5023 have a UK registration?

If So do you know what it was? Eric

I know that it did. Geoff is putting together some pics for me. I did see some with a plate on the car. When I get that info, I'll pass it on. I'd certainly like to make a UK plate for it that is identical to the original, for show purposes only.

Tyler Townsley · 06-16-2010

According to Minniker the first 25 engines were phase 1 motors so all those listed were phase 1 and some came back to US. There are some phase 1 motors in the NCM anyone know the s/ns?

Tyler

BlackWidow#2 · 06-18-2010

Quote:

Originally Posted by 1989ZR1#74

Paid the 24.99BP for 5 reports and came up with some more neat data.

D123 FPW Red, Imported: 08/11/1986, Exported: 07/16/1987 Engine#: LT5006
D131 FPW Yellow, Imported: 10/03/1986, Exported: N/A, Engine#: LT50013
D137 FPW White, Imported: 11/01/1986, Exported: 12/1/1987, Engine#: LT5020
D138 FPW Grey, Imported: 11/01/1986, Exported: 01/01/1987, Engine# LT5021
D142 FPW Gold, Imported 10/16/1986, Exported: N/A, Engine#: LT5018

The narrow bodies were built by Hawtal-Whiting and Lotus. (See HOTB pages 83 to 87) Per HOTB the first 5 "Component Cars" where shipped to Mosport International Raceway in Bowmanville, Ontario, Canada for Testing. I would bet that D139FPW was one of them.

HOTB also states they built 20 to 25 of these "Component Cars" Seeing the Engine numbers on the Autocheck reports would lead one to think this may be true. Now I need those plates numbers to track them down..

Hi Eric, This is unbelievable information! You are quite the detective.
Above you mention you would bet D139FPW was among the first 5.
Is this a typo? Did you mean 138? Or is there more to the story?
Thanks, George

1989ZR1#74 · 06-19-2010

Quote:

Originally Posted by BlackWidow#2

Hi Eric, This is unbelievable information! You are quite the detective.
Above you mention you would bet D139FPW was among the first 5.
Is this a typo? Did you mean 138? Or is there more to the story?
Thanks, George

You get the prize for reading retention! My bad should be D138 FPW. Glad someone is paying attention.

Blue Flame Restorations · 07-28-2010

Eric, how is your 89 project going? Did I hear that you bought a matching vin 2011??????

1989ZR1#74 · 08-20-2010

Quote:

Originally Posted by Blue Flame Restorations

Eric, how is your 89 project going? Did I hear that you bought a matching vin 2011??????

Hey Brett, I am back,. No 2011 in my future. Would be neat though. I Think Roy Sinor ordered 2011 ZR1 #074.

06-15-2010	#1
1989ZR1#74 Join Date: Jan 2009 Location: Scottsdale, AZ Posts: 700	Survey of UK license plates searching for Narrow Bodies After noting that Keiths 86 and the two 86 prototypes in HOTB have license plates in the same range I decided to see if I could find any more. Using the UK Carfax site Autocheck I began hunting them down. It appears that there were at least 5 Corvettes within +/- 20 license plates. Here is what I found: D123FPW Chevrolet Corvette, Red, Manual, 2 Door Saloon, Petrol D131FPW Chevrolet Corvette, Yellow, Manual, 2 Door Saloon, Petrol D137FPW Chevrolet Corvette, White, Manual, 2 Door Saloon, Petrol D138FPW Chevrolet Corvette, Grey, Manual, 2 Door Saloon,Petrol D142FPW Chevrolet Corvette, Gold, Manual,2 Door Saloon,Petrol The two bold listings are Corvettes that are unknown. Eric __________________ 1989 ZR-1 #04 Pilot, Advertising/PR Campbell-Ewald S9YKH1 1989 ZR-1 #58 LT5 only 1989 ZR-1 #74 Unreleased Production / PR Dept 9PR110 NCRS #3,182 SACC #2,420 Member Corvette Museum Corvette Forum: "ewjxn" 2009, 2010 Gathering Attendee

06-16-2010	#3
1989ZR1#74 Join Date: Jan 2009 Location: Scottsdale, AZ Posts: 700	Re: Survey of UK license plates searching for Narrow Bodies Paid the 24.99BP for 5 reports and came up with some more neat data. D123 FPW Red, Imported: 08/11/1986, Exported: 07/16/1987 Engine#: LT5006 D131 FPW Yellow, Imported: 10/03/1986, Exported: N/A, Engine#: LT50013 D137 FPW White, Imported: 11/01/1986, Exported: 12/1/1987, Engine#: LT5020 D138 FPW Grey, Imported: 11/01/1986, Exported: 01/01/1987, Engine# LT5021 D142 FPW Gold, Imported 10/16/1986, Exported: N/A, Engine#: LT5018 The narrow bodies were built by Hawtal-Whiting and Lotus. (See HOTB pages 83 to 87) Per HOTB the first 5 "Component Cars" where shipped to Mosport International Raceway in Bowmanville, Ontario, Canada for Testing. I would bet that D139FPW was one of them. HOTB also states they built 20 to 25 of these "Component Cars" Seeing the Engine numbers on the Autocheck reports would lead one to think this may be true. Now I need those plates numbers to track them down.. __________________ 1989 ZR-1 #04 Pilot, Advertising/PR Campbell-Ewald S9YKH1 1989 ZR-1 #58 LT5 only 1989 ZR-1 #74 Unreleased Production / PR Dept 9PR110 NCRS #3,182 SACC #2,420 Member Corvette Museum Corvette Forum: "ewjxn" 2009, 2010 Gathering Attendee Last edited by 1989ZR1#74; 06-16-2010 at 02:00 PM.

06-16-2010	#6
Tyler Townsley Join Date: May 2005 Location: Nichols, FL Posts: 615	Re: Survey of UK license plates searching for Narrow Bodies According to Minniker the first 25 engines were phase 1 motors so all those listed were phase 1 and some came back to US. There are some phase 1 motors in the NCM anyone know the s/ns? Tyler __________________ 55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White

07-28-2010	#9
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: Survey of UK license plates searching for Narrow Bodies Eric, how is your 89 project going? Did I hear that you bought a matching vin 2011?????? __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project