![]() |
#1 |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 951
|
![]()
Hi folks
Looking for the old R-D Racing Cross-Bar. This is the one that goes across the car, behind the seats. Looks like this:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
![]()
Erik the Brey-Krause is a superior bar have you looked at one of those. GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Jul 2016
Location: Greater St. Louis
Posts: 487
|
![]()
I?ll need to check but pretty sure I have a spare Cross Bar. I?m in the middle of a move but will be over at the new house tomorrow. It did not come with mounting hardware when I bought it.
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jan 2004
Location: Murrieta, CA
Posts: 241
|
![]()
Hi Eric
I built my own a while back and it bolts in at the upper seat belt bolt and also at the roof carrier mounting points. ( 4 points of attachment ) I am pretty sure I still have your number so I can send you pictures of it. The main bar meets the thickness requirement though I have not drilled a small hole in it so the tech guys can check it. I sold my Z so I can't take a picture of it when installed. My car was a 91 and I believe the distance to the mounting points is the same as yours.
__________________
91 ZR-1 #661 Watsons, 3" exhaust, Borlas... Hurst, 4.11s, Samco, RD radiator, gel coated motor... turquise / black Last edited by ZRXMAX; 09-13-2021 at 04:51 PM. |
![]() |
![]() |
![]() |
#5 | |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 951
|
![]() Quote:
Thanks
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
![]() |
![]() |
![]() |
#6 | |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 951
|
![]() Quote:
Thanks
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
![]() |
![]() |
![]() |
#7 | |
![]() Join Date: Nov 2016
Location: New Brunswick
Posts: 951
|
![]() Quote:
__________________
1990 ZR-1 # 996 "All Corvettes are red. The rest are mistakes." - John Heinricy |
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Sep 2016
Location: Ocala, FL
Posts: 889
|
![]()
Check out Exotic muscle. They have a bar. RK appears to just do engines now. Brey Krause system looked excellent and you can retain stock seat and belts with appropriate brackets. Bolts in to existing points. Should stiffen the car some too.
__________________
Steve Young 1991 ZR-1 Quasar Blue Metallic/Black #729 Second Owner 1991 ZR-1 Dark Red Metallic/Black #2040 SOLD 1990 ZR-1 Dark Red Metallic/Saddle #1670 SOLD Double your happiness.....complain half as much. |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,573
|
![]()
As GoldCylon and Young1 mentioned, the Brey-Krause is an outstanding, high quality product and top-notch as far as I am concerned. I had the Hardbar and replaced it with BK. Here are some photos of my install if it helps.
Image1633236726.171260.jpg Image1633236738.293146.jpg Image1633236752.941110.jpg Image1633236770.183133.jpg Image1633236792.302299.jpg Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() Last edited by HAWAIIZR-1; 10-03-2021 at 01:26 AM. |
![]() |
![]() |
![]() |
#10 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,573
|
![]()
Brey-Krause bars have the loops for the harness and the bracket on the side and front of the seats for 6 point. Very clean and allows use of stock seat belt.
Image1633238378.968976.jpg Image1633238391.040377.jpg Image1633317285.522447.jpg Image1633317298.987538.jpg Image1633317312.301058.jpg Sent from my iPhone using ZR-1 Net Registry
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() Last edited by HAWAIIZR-1; 10-03-2021 at 11:15 PM. |
![]() |
![]() |
![]() |
|
|