ZR-1 Net Registry Forums - WTB: R-D Racing Cross-Bar

Page 1 of 2

Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)

- C4 ZR-1 Parts For Sale / Wanted (http://zr1.net/forum/forumdisplay.php?f=10)

- - WTB: R-D Racing Cross-Bar (http://zr1.net/forum/showthread.php?t=33413)

Erik	09-11-2021 10:23 PM

WTB: R-D Racing Cross-Bar

1 Attachment(s)

Hi folks
Looking for the old R-D Racing Cross-Bar. This is the one that goes across the car, behind the seats. Looks like this:

GOLDCYLON

09-12-2021 12:25 AM

Re: WTB: R-D Racing Cross-Bar

Quote:

Originally Posted by Erik (Post 327040)

Hi folks
Looking for the old R-D Racing Cross-Bar. This is the one that goes across the car, behind the seats. Looks like this:

Erik the Brey-Krause is a superior bar have you looked at one of those. GC

conesare2seconds

09-12-2021 12:22 PM

Re: WTB: R-D Racing Cross-Bar

I?ll need to check but pretty sure I have a spare Cross Bar. I?m in the middle of a move but will be over at the new house tomorrow. It did not come with mounting hardware when I bought it.

ZRXMAX

09-12-2021 03:34 PM

Re: WTB: R-D Racing Cross-Bar

Hi Eric
I built my own a while back and it bolts in at the upper seat belt bolt and also at the roof carrier mounting points. ( 4 points of attachment ) I am pretty sure I still have your number so I can send you pictures of it. The main bar meets the thickness requirement though I have not drilled a small hole in it so the tech guys can check it. I sold my Z so I can't take a picture of it when installed. My car was a 91 and I believe the distance to the mounting points is the same as yours.

Erik	09-12-2021 09:21 PM

Re: WTB: R-D Racing Cross-Bar

Quote:

Originally Posted by conesare2seconds (Post 327048)

I?ll need to check but pretty sure I have a spare Cross Bar. I?m in the middle of a move but will be over at the new house tomorrow. It did not come with mounting hardware when I bought it.

Awesome!
Thanks

Erik	09-12-2021 09:22 PM

Re: WTB: R-D Racing Cross-Bar

Quote:

Originally Posted by GOLDCYLON (Post 327044)

Erik the Brey-Krause is a superior bar have you looked at one of those. GC

I have not. Not familiar with those at all. Time to take a look!
Thanks

Erik	09-12-2021 09:24 PM

Re: WTB: R-D Racing Cross-Bar

Quote:

Originally Posted by ZRXMAX (Post 327056)

Hi Eric
I built my own a while back and it bolts in at the upper seat belt bolt and also at the roof carrier mounting points. ( 4 points of attachment ) I am pretty sure I still have your number so I can send you pictures of it. The main bar meets the thickness requirement though I have not drilled a small hole in it so the tech guys can check it. I sold my Z so I can take a picture of it when installed. My car was a 91 and I believe the distance to the mounting points is the same as yours.

Excellent! Looking forward to it.

Young1

10-02-2021 09:26 PM

Re: WTB: R-D Racing Cross-Bar

Check out Exotic muscle. They have a bar. RK appears to just do engines now. Brey Krause system looked excellent and you can retain stock seat and belts with appropriate brackets. Bolts in to existing points. Should stiffen the car some too.

HAWAIIZR-1

10-03-2021 12:53 AM

WTB: R-D Racing Cross-Bar

5 Attachment(s)

As GoldCylon and Young1 mentioned, the Brey-Krause is an outstanding, high quality product and top-notch as far as I am concerned. I had the Hardbar and replaced it with BK. Here are some photos of my install if it helps.

Attachment 16426
Attachment 16427
Attachment 16428
Attachment 16429
Attachment 16430

Sent from my iPhone using ZR-1 Net Registry

HAWAIIZR-1

10-03-2021 01:19 AM

WTB: R-D Racing Cross-Bar

5 Attachment(s)

Brey-Krause bars have the loops for the harness and the bracket on the side and front of the seats for 6 point. Very clean and allows use of stock seat belt.

Attachment 16431
Attachment 16432
Attachment 16455
Attachment 16456
Attachment 16457

Sent from my iPhone using ZR-1 Net Registry

All times are GMT -4. The time now is 06:18 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page