|
10-20-2014
|
#1 |
 
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Front shock bushing needed
In need of one or two front shock bushings. This is the bushing that is on the top of each shock under the steel washer.
Brad |
|
|
|
10-20-2014
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Front shock bushing needed
Contact DRM that's were I picked up my pair. GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-20-2014
|
#3 | |
|
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Front shock bushing needed
Quote:
Just checked and those appear to be poly bushings, I was hoping to find a set of original take offs if possible. Last edited by Z06scentair; 10-20-2014 at 07:47 PM. |
|
|
|
|
|
10-20-2014
|
#4 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Front shock bushing needed
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-20-2014
|
#5 | |
|
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Front shock bushing needed
Quote:
Do you still have the one's removed? |
|
|
|
|
|
10-21-2014
|
#6 |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,750
|
Re: Front shock bushing needed
The smaller round ones? I have some
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
10-21-2014
|
#7 | |
|
Join Date: Oct 2004
Posts: 1,890
|
Re: Front shock bushing needed
Quote:
Last edited by WVZR-1; 10-21-2014 at 07:00 AM. |
|
|
|
|
|
10-21-2014
|
#8 | |
|
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Front shock bushing needed
Quote:
I would guess 1.5 to 2" in diameter with a .4375" center bore. It appears to be .4375" thick. Brad |
|
|
|
|
|
10-21-2014
|
#9 | |
|
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
|
Re: Front shock bushing needed
Quote:
Thought about that last night, it does worry me a bit about changing them out again for a show. For some reason one side seems to swell and push out from underneath the steel washer. It seems some of the fluid has leaked from that shock and caused this swelling. Poly would be much less prone to the swelling as the original EPDM bushing. Last edited by Z06scentair; 10-21-2014 at 08:57 AM. |
|
|
|
|
|
10-24-2014
|
#10 |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,750
|
Re: Front shock bushing needed
These are what I have used originals.
I don't even know which is which right now, been a while since I have messed with the shocks.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
 |
|
|
Linear Mode
