ZR-1 Net Registry Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

ZR-1 Net Registry Forums (http://zr1.net/forum/index.php)
-   C4 ZR-1 Parts For Sale / Wanted (http://zr1.net/forum/forumdisplay.php?f=10)
-   -   Front shock bushing needed (http://zr1.net/forum/showthread.php?t=24074)

Z06scentair 10-20-2014 06:17 PM
Front shock bushing needed
 
In need of one or two front shock bushings. This is the bushing that is on the top of each shock under the steel washer.

Brad

GOLDCYLON 10-20-2014 06:29 PM
Re: Front shock bushing needed
 
Contact DRM that's were I picked up my pair. GC

Z06scentair 10-20-2014 06:38 PM
Re: Front shock bushing needed
 
Quote:
Originally Posted by GOLDCYLON (Post 214418)
Contact DRM that's were I picked up my pair. GC
GC

Just checked and those appear to be poly bushings, I was hoping to find a set of original take offs if possible.

GOLDCYLON 10-20-2014 08:08 PM
Re: Front shock bushing needed
 
Quote:
Originally Posted by Z06scentair (Post 214419)
GC

Just checked and those appear to be poly bushings, I was hoping to find a set of original take offs if possible.
Got it yep I upgraded to all poly. Sorry about that. GC

Z06scentair 10-20-2014 08:23 PM
Re: Front shock bushing needed
 
Quote:
Originally Posted by GOLDCYLON (Post 214420)
Got it yep I upgraded to all poly. Sorry about that. GC
No need for apologies....I appreciate the reference!

Do you still have the one's removed?

phrogs 10-20-2014 11:14 PM
Re: Front shock bushing needed
 
The smaller round ones? I have some

WVZR-1 10-21-2014 05:40 AM
Re: Front shock bushing needed
 
Quote:
Originally Posted by Z06scentair (Post 214415)
In need of one or two front shock bushings. This is the bushing that is on the top of each shock under the steel washer.

Brad
Eckler's actually still show the upper for FX3 on the front. They mention poly also and don't reference it to the GM OE # 10157964 but ...... poly used as a reference or is it actually a "premium" product? I would think poly desired and I'd maybe consider a used OE for a "one time" National NCRS event only maybe. I don't believe I'd be wanting to R&R the adjusters frequently.

Z06scentair 10-21-2014 07:34 AM
Re: Front shock bushing needed
 
Quote:
Originally Posted by phrogs (Post 214444)
The smaller round ones? I have some
Johnny

I would guess 1.5 to 2" in diameter with a .4375" center bore. It appears to be .4375" thick.

Brad

Z06scentair 10-21-2014 07:54 AM
Re: Front shock bushing needed
 
Quote:
Originally Posted by WVZR-1 (Post 214449)
Eckler's actually still show the upper for FX3 on the front. They mention poly also and don't reference it to the GM OE # 10157964 but ...... poly used as a reference or is it actually a "premium" product? I would think poly desired and I'd maybe consider a used OE for a "one time" National NCRS event only maybe. I don't believe I'd be wanting to R&R the adjusters frequently.
Dave,

Thought about that last night, it does worry me a bit about changing them out again for a show.

For some reason one side seems to swell and push out from underneath the steel washer. It seems some of the fluid has leaked from that shock and caused this swelling. Poly would be much less prone to the swelling as the original EPDM bushing.

phrogs 10-24-2014 01:05 AM
Re: Front shock bushing needed
 
1 Attachment(s)
These are what I have used originals.

I don't even know which is which right now, been a while since I have messed with the shocks.


All times are GMT -4. The time now is 08:13 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025