90 ZR-1 #2273 - To be rescued - Page 5 - ZR-1 Net Registry Forums

tommy · 02-19-2018

nice story, good work!

tell me pls clipers are from porsche 911?

S.hafsmo · 02-19-2018

Thanks!
They are indeed the "big red" from the 911 (993). The kit is made by Movit in Germany.

tommy · 02-19-2018

ok, thanks.

S.hafsmo · 02-22-2018

As mentioned before, I've had some idle issues. A couple days ago I picked up the investigation with the following results. The car idles steady at approx. 750 RPM when the fans are running. If I plug the bore to the primary blade, the idle reduces to 700. IAC count obviously at zero.
I removed the TB for another inspection, and it's obvious that there is quite a bit of wear on all the plates. The secondary blades show a lot of light around the shafts, and the primary lights up everywhere.
Instead of going through with the whole DAG-procedure, I've now packed up the TB and sent it of to the US for Marc to work his magic. Must say I'm curious if he'll be able to mend it.

I've also removed the exhaust, as the pilot bearing is next on the list of jobs.

The daily effort is rather limited due to the 5°F in my garage.

S.hafsmo · 02-22-2018

Primary and secondary blades

VisionOP8 · 02-22-2018

Cool story man. I love reading stuff like that. Looks to me like it's in good hands this time.

Ccmano · 02-22-2018

Quote:

Originally Posted by S.hafsmo

As mentioned before, I've had some idle issues. A couple days ago I picked up the investigation with the following results. The car idles steady at approx. 750 RPM when the fans are running. If I plug the bore to the primary blade, the idle reduces to 700. IAC count obviously at zero.
I removed the TB for another inspection, and it's obvious that there is quite a bit of wear on all the plates. The secondary blades show a lot of light around the shafts, and the primary lights up everywhere.
Instead of going through with the whole DAG-procedure, I've now packed up the TB and sent it of to the US for Marc to work his magic. Must say I'm curious if he'll be able to mend it.

I've also removed the exhaust, as the pilot bearing is next on the list of jobs.

The daily effort is rather limited due to the 5°F in my garage.

That will do it. Good call sending the TB to Marc. I don’t think is so much wear as it is the DAG was either wiped off or it somehow came off. My 181k mile car shows very little light through the secondary throttle Plates. If wear were an issue mine should certainly show it. I think in most cases it just over zealous cleaning.
H

LGAFF · 02-22-2018

This stuff works like DAG...I believe its the same material essentially
https://www.grainger.com/product/41P...180222234249:s

S.hafsmo · 02-23-2018

Might be just the DAG on the secondary blades, but as the photo shows indirect light, the gap/axial clearance is rather large.
The primary is however clearly worn, though the light makes it impossible to see on that pic. It's got the same wear as Phil (Jagdpanzer) had, just not quite as bad.

Throttle Body Primary Blade wear issue

I've got a bottle of Molycote D321r laying around (DAG), but I'll leave it on the counter until I've seen what Marc can do with it.

S.hafsmo · 03-20-2018

Slightly warmer today, allowing some minor progress. Need expert opinions on the condition of the clutch/PP/Flywheel condition. Thoughts?

The clutch plate measures approx. 6.5mm thickness. Whats the thickness of a new plate?

Couldn't really see too many signs of the pilot bearing rotating inside the crank, and throwout bearing feels surprisingly good. Nice and tight.

There is no play between the masses of the flywheel, but it does allow about 1/2" movement between them, some force required.

02-19-2018	#41
tommy Join Date: Feb 2018 Location: Poland Posts: 58	Re: 90 ZR-1 #2273 - To be rescued nice story, good work! tell me pls clipers are from porsche 911?

02-19-2018	#42
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: 90 ZR-1 #2273 - To be rescued Thanks! They are indeed the "big red" from the 911 (993). The kit is made by Movit in Germany. __________________ - '90 ZR-1

02-19-2018	#43
tommy Join Date: Feb 2018 Location: Poland Posts: 58	Re: 90 ZR-1 #2273 - To be rescued ok, thanks.

02-22-2018	#44
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: 90 ZR-1 #2273 - To be rescued As mentioned before, I've had some idle issues. A couple days ago I picked up the investigation with the following results. The car idles steady at approx. 750 RPM when the fans are running. If I plug the bore to the primary blade, the idle reduces to 700. IAC count obviously at zero. I removed the TB for another inspection, and it's obvious that there is quite a bit of wear on all the plates. The secondary blades show a lot of light around the shafts, and the primary lights up everywhere. Instead of going through with the whole DAG-procedure, I've now packed up the TB and sent it of to the US for Marc to work his magic. Must say I'm curious if he'll be able to mend it. I've also removed the exhaust, as the pilot bearing is next on the list of jobs. The daily effort is rather limited due to the 5°F in my garage. __________________ - '90 ZR-1 Last edited by S.hafsmo; 02-22-2018 at 04:21 AM.

02-22-2018	#45
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: 90 ZR-1 #2273 - To be rescued Primary and secondary blades __________________ - '90 ZR-1 Last edited by S.hafsmo; 02-22-2018 at 04:20 AM.

02-22-2018	#46
VisionOP8 Join Date: Dec 2017 Location: Brandon, FL Posts: 23	Re: 90 ZR-1 #2273 - To be rescued Cool story man. I love reading stuff like that. Looks to me like it's in good hands this time.

02-22-2018	#48
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: 90 ZR-1 #2273 - To be rescued This stuff works like DAG...I believe its the same material essentially https://www.grainger.com/product/41P...180222234249:s __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

02-23-2018	#49
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: 90 ZR-1 #2273 - To be rescued Might be just the DAG on the secondary blades, but as the photo shows indirect light, the gap/axial clearance is rather large. The primary is however clearly worn, though the light makes it impossible to see on that pic. It's got the same wear as Phil (Jagdpanzer) had, just not quite as bad. Throttle Body Primary Blade wear issue I've got a bottle of Molycote D321r laying around (DAG), but I'll leave it on the counter until I've seen what Marc can do with it. __________________ - '90 ZR-1 Last edited by S.hafsmo; 02-23-2018 at 01:01 AM.

03-20-2018	#50
S.hafsmo Join Date: Nov 2016 Location: Norway Posts: 397	Re: 90 ZR-1 #2273 - To be rescued Slightly warmer today, allowing some minor progress. Need expert opinions on the condition of the clutch/PP/Flywheel condition. Thoughts? The clutch plate measures approx. 6.5mm thickness. Whats the thickness of a new plate? Couldn't really see too many signs of the pilot bearing rotating inside the crank, and throwout bearing feels surprisingly good. Nice and tight. There is no play between the masses of the flywheel, but it does allow about 1/2" movement between them, some force required. __________________ - '90 ZR-1 Last edited by S.hafsmo; 03-20-2018 at 12:56 PM.