|
07-03-2008
|
#11 |
 
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: AVIC-D3 Install any ZR-1 owners do this yet?
I agree, a switch would work. However, I will live with it as it is. The only time it has mattered is if I park the Corvette below another car on the lift which I haven't done because I am using the lift for maintenance.
Jim |
|
|
|
07-19-2008
|
#12 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: AVIC-D3 Install any ZR-1 owners do this yet?
Jim sent you a PM. Daryll
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-14-2009
|
#13 | |
|
Join Date: Sep 2009
Location: Mansfield, Texas
Posts: 33
|
Re: AVIC-D3 Install any ZR-1 owners do this yet?
Quote:
Wish you were closer to us! I will put pics up of our install when it is finished -- Z2, Focal speakers, Focal amps, JL subs, back-up camera. A Custom box that will blend forward into the center console and will have cup holders that actually hold drinks. It will be clean, based on functionality and will add a modern touch to the car. All the plastic in the car will be wrapped in suede or maybe a carbon fiber. The antenna will be shaved and a powered am/fm antenna will be added under the dash. Also we will make sure the design is one to where you can get to the brake equipment if needed without too much headache. The top holder will still function as well.
__________________
a few chevy's, a few ford's, nissan, porsche, toyota, fountain 32 cc, and a couple of skateboards. |
|
|
|
|
|
10-14-2009
|
#14 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: AVIC-D3 Install any ZR-1 owners do this yet?
Quote:
http://www.zr1netregistry.com/forum/...ead.php?t=6145
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
10-15-2009
|
#15 | |
|
Join Date: Sep 2009
Location: Mansfield, Texas
Posts: 33
|
Re: AVIC-D3 Install any ZR-1 owners do this yet?
Quote:
__________________
a few chevy's, a few ford's, nissan, porsche, toyota, fountain 32 cc, and a couple of skateboards. |
|
|
|
|
 |
|
|
Linear Mode
