ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-15-2006   #2
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
Default Re: 91 ZR-1 Cutting Out Under Load

Hi Greg, I'm an apprentice owner so I'm not too versed on Z's yet but you mean that the car runs fine unless you lean on it?

Reading your description I was thinking how similar mine behaved when the injectors were starting to short out but mine would not run at all without me feeling & hearing & smelling the miss...load or no load.

You don't have a SES light, not even a winking SES light? You checked for codes? How are the plugs, wires, coils? Fuel pumps & regulator & filter are okay? Anything the ECM monitors or controls will yield a SES light if a malfunction happens. You don't have a scanner, like a Tech 1A, to scan the motor with? This is stupid but it didn't have a backfire? Those will blow off the MAP hose. Sorry I don't have something better to say like it's "this"! Do you have the Helm manual? Looks like you have to start at the beginning. The dealer or any shop would do the same steps in the absence of a SES light to give hints of where to start looking. You know spark? Fuel? Vacuum leaks?

ttt! One of the more knowledgable guys will see this & have something for you.

Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025