Hello - ZR-1 Net Registry Forums

Hog · 08-03-2010

Hi all, my name is Paul Schermerhorn. Over my summer holidays away from nursing school, I have spent many many hours reading the posts on these forums.

I dont currently own a ZR1 but I do drive the other GM DOHC engine in the 4.6 Northstar. I recently had some headgasket issues so the engine block was drilled, tapped and studded.
I am an avid GM enthusiast, I do some OBD2 PCM tuning and have installed a marine intake/EFI system in my Vortec 350 truck that allows me to run convetional fuel injection instead of the stock non-adjustable poppet spider.

For these forums providing me with so much info and entertainment this summer, I wish to extend an offer of help to anyone travelling through Ontario on the 401. I live just off the 401 at Sweaburg road near Woodstock Ontario.
My Dad runs a 1 man collision business and he specializes in front end work/alignments. The shop has a drive on "rack" that allows work to be done underneath the vehicle. I have done many a trans swap on my vehicles over the years. If anyone needs an alignment that can be arranged with my Dad as he is licensed and has over 30 years running his shop.
He has worked with many vehicles including all generations of Corvettes and has a 57 Chev Belair 2 door hardtop 283 powerpack, that was featured in the 1997 Snap On calendar (March) as well as in a 1996 15 second GM superbowl commercial for the 1996 Chev Cavalier. The car is a driver and since its frame off resto in 1991 has logged over 70,000 miles. It has scored its Platinum certificate with 994/1000 IIRC.

If anyone runs out of gas, or has a breakdown, and needs some help feel free to contact me. I can supply my Dad's shop number, that would be the easiest way to get a hold of me.

This seems like a friendly community and just wanted to offer help if ever needed. I know what its like to be brokendown far away from home, not a good feeling.

Take care and thanks for the hours and hours of good reading.

peace
Hog

A26B · 08-03-2010

Thanks for dropping in and sharing our common interests, here in the ZR-1NetRegistry forum.

Cheers,

Z Factor · 08-03-2010

Hello and welcome to the forum.

I have moved your offer of assistance to the Canadian section considering your location.

Hog · 08-08-2010

Thanks guys. Hopefully I can get my hands on a ZR-1 before too long.

peace
Hog

WB9MCW · 08-08-2010

Hi HOG glad to have you sign up -- The ZR-1 in your future will happen -- I can tell you are a great candidate for one.

flyin ryan · 08-13-2010

Quote:

Originally Posted by WB9MCW

Hi HOG glad to have you sign up -- The ZR-1 in your future will happen -- I can tell you are a great candidate for one.

Welcome

. I totally agree with B.

Hammer · 08-14-2010

Welcome to the Registry Forums. Glad you are finding such great reading. Just about anything you need or want to know about ZR-1's is here for sure. As far as acquiring a Z, there are many to choose from and the mileage and pricing are all over the place. Now is a good time to buy though. I think prices will only go up from here.

08-03-2010	#1
Hog Join Date: Jul 2010 Location: Woodstock, Ontario, Canada Posts: 1,271	Hello Hi all, my name is Paul Schermerhorn. Over my summer holidays away from nursing school, I have spent many many hours reading the posts on these forums. I dont currently own a ZR1 but I do drive the other GM DOHC engine in the 4.6 Northstar. I recently had some headgasket issues so the engine block was drilled, tapped and studded. I am an avid GM enthusiast, I do some OBD2 PCM tuning and have installed a marine intake/EFI system in my Vortec 350 truck that allows me to run convetional fuel injection instead of the stock non-adjustable poppet spider. For these forums providing me with so much info and entertainment this summer, I wish to extend an offer of help to anyone travelling through Ontario on the 401. I live just off the 401 at Sweaburg road near Woodstock Ontario. My Dad runs a 1 man collision business and he specializes in front end work/alignments. The shop has a drive on "rack" that allows work to be done underneath the vehicle. I have done many a trans swap on my vehicles over the years. If anyone needs an alignment that can be arranged with my Dad as he is licensed and has over 30 years running his shop. He has worked with many vehicles including all generations of Corvettes and has a 57 Chev Belair 2 door hardtop 283 powerpack, that was featured in the 1997 Snap On calendar (March) as well as in a 1996 15 second GM superbowl commercial for the 1996 Chev Cavalier. The car is a driver and since its frame off resto in 1991 has logged over 70,000 miles. It has scored its Platinum certificate with 994/1000 IIRC. If anyone runs out of gas, or has a breakdown, and needs some help feel free to contact me. I can supply my Dad's shop number, that would be the easiest way to get a hold of me. This seems like a friendly community and just wanted to offer help if ever needed. I know what its like to be brokendown far away from home, not a good feeling. Take care and thanks for the hours and hours of good reading. peace Hog

08-03-2010	#2
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,392	Re: Hello Thanks for dropping in and sharing our common interests, here in the ZR-1NetRegistry forum. Cheers, __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

08-03-2010	#3
Z Factor Join Date: Dec 2003 Location: S. Florida Posts: 2,647	Re: Hello Hello and welcome to the forum. I have moved your offer of assistance to the Canadian section considering your location.

08-08-2010	#4
Hog Join Date: Jul 2010 Location: Woodstock, Ontario, Canada Posts: 1,271	Re: Hello Thanks guys. Hopefully I can get my hands on a ZR-1 before too long. peace Hog

08-08-2010	#5
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,584	Re: Hello Hi HOG glad to have you sign up -- The ZR-1 in your future will happen -- I can tell you are a great candidate for one.

08-14-2010	#7
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,647	Re: Hello Welcome to the Registry Forums. Glad you are finding such great reading. Just about anything you need or want to know about ZR-1's is here for sure. As far as acquiring a Z, there are many to choose from and the mileage and pricing are all over the place. Now is a good time to buy though. I think prices will only go up from here.