![]() |
#1 |
![]() Join Date: Aug 2006
Location: Texas
Posts: 518
|
![]()
Polished my a-- off on some aluminum wheel centers only to realize they are zinc coated and won't polish until the zinc is removed. I want to put a mirror polish on them to match the wheel rims. What is the best way to cut the zinc coat to get to the aluminum ??? Anyone done this ?? Thanks for the help. I hate to just grind them down and have to polish out deep swirls.
![]()
__________________
1991 ZR-1, Black, Black, # 541 Last edited by Sgreg; 06-18-2010 at 09:36 PM. |
![]() |
![]() |
![]() |
#2 | |
![]() ![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,154
|
![]() Quote:
Carter may know ? ![]()
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Aug 2006
Location: Texas
Posts: 518
|
![]()
__________________
1991 ZR-1, Black, Black, # 541 |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
![]()
Send em to me and I'll machine the zinc off and then you can polish to your little hearts content
![]()
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
![]() |
![]() |
![]() |
#5 | |
![]() Join Date: Aug 2006
Location: Texas
Posts: 518
|
![]() Quote:
![]()
__________________
1991 ZR-1, Black, Black, # 541 |
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
![]()
If done right the zinc coating is a bear to deal with. It sure does protect the part. Good luck.
![]()
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
![]() |
![]() |
![]() |
|
|