info needed re clutch refit

[richard sanderson]

Thanks everyone for all your help. I have now ordered the clutch kit from Carolina clutch, and will get the C-beam plates and tranny seals from Bill B. I did not bother with the C-beam cement, as I figure that with the plates, the beam will be held tight anyway! Another thing that old posts have mentioned is a set of headless bolts, one longer that the others, to help when teasing the tranny back on. I would like to prepare these in advance. Can anybody give me the spec. on these?

[A26B]

Originally Posted by richard sanderson

Thanks everyone for all your help. I have now ordered the clutch kit from Carolina clutch, and will get the C-beam plates and tranny seals from Bill B. I did not bother with the C-beam cement, as I figure that with the plates, the beam will be held tight anyway! Another thing that old posts have mentioned is a set of headless bolts, one longer that the others, to help when teasing the tranny back on. I would like to prepare these in advance. Can anybody give me the spec. on these?

Here you go Richard... All are the same length. Make 3.