Cam specs for Ported Heads

[Pete]

Originally Posted by XfireZ51

Good point. I'm also curious about what software tool Todd P. used (if at all) to develop the cam profile he recently posted on the thread about his 427 project.
Here's his latest:
http://www.zr1.net/forum/showthread.php?t=11411&page=3
What Todd is doing is very different from what's been attempted before. We certainly have much more data regarding either stock or ported heads on a stock short block. I'm just interested in using a similar process for the for the "run of the mill" LT-5 mod. If its been done before, I'd be interested in the results.

Here's my take.

I doubt it but, if Todd were to loose any low end power with his cam choice he will make up with C.I.'s.

Basicly if Todd makes for example 650RWHP @ 7k RPM i'm pretty sure he won't be making zero power at 2k or 3k RPM.
I can't wait to see how it turns out.

Pete