WTB-Crankshaft plugs - ZR-1 Net Registry Forums

tpepmeie · 10-07-2009

All,
Have come across a problem with my crankshaft. The press-in plugs supplied by Bryant do not fit the holes in the crank. Does anyone have the factory plugs? are they NLA from GM?

Talking about the pressed-in plugs, NOT the threaded plugs. I *think* the correct size is 22mm, although the rear plug is bigger.

Thanks,
Todd Pepmeier

flyin ryan · 10-07-2009

Shouldn't be too hard to find some frost/cup plug at an auto parts store or machine shop that'll fit properly. I wouldn't even bother to try & find the corrcet one's, per application. Also...a person doesn't know 100% that Bryant didn't change the size a hair either

.

10-07-2009

These little guys #10067639

Polo-1 · 10-07-2009

Todd
You have to measure the hole. My Moldex was 7/8 + .002 The plugs come in + or - sizes. A local machine shop that does crank work can help you out, they did for me anyways. My set of stockers have no press fit to them on the Moldex crank.

limey · 10-12-2009

in stock, pm sent.

10-07-2009	#2
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: WTB-Crankshaft plugs Shouldn't be too hard to find some frost/cup plug at an auto parts store or machine shop that'll fit properly. I wouldn't even bother to try & find the corrcet one's, per application. Also...a person doesn't know 100% that Bryant didn't change the size a hair either . __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

10-07-2009	#3
Jeffvette Guest Posts: n/a	Re: WTB-Crankshaft plugs These little guys #10067639

10-07-2009	#4
Polo-1 Join Date: Sep 2005 Location: Washington Posts: 955	Re: WTB-Crankshaft plugs Todd You have to measure the hole. My Moldex was 7/8 + .002 The plugs come in + or - sizes. A local machine shop that does crank work can help you out, they did for me anyways. My set of stockers have no press fit to them on the Moldex crank.

10-12-2009	#5
limey Join Date: Oct 2008 Location: tampa Posts: 538	Re: WTB-Crankshaft plugs in stock, pm sent.

10-07-2009	#1
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 814	WTB-Crankshaft plugs All, Have come across a problem with my crankshaft. The press-in plugs supplied by Bryant do not fit the holes in the crank. Does anyone have the factory plugs? are they NLA from GM? Talking about the pressed-in plugs, NOT the threaded plugs. I think the correct size is 22mm, although the rear plug is bigger. Thanks, Todd Pepmeier Last edited by tpepmeie; 10-07-2009 at 09:44 AM.