ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 08-18-2009   #1
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Sept. 26th Crown Point Corvette Drags

OK. Its official. Here it is. It was a great time last year. We have the track to ourselves. Good times and good folks. We can raise the appreciation level among C5-C6 for a DOHC 32V 5.7L.
http://www.crownpointvettes.org/2009...0challenge.htm

I'll communicate with Jeff Greystone the numbers we will have. Let me know.
XfireZ51 is offline   Reply With Quote
Old 08-18-2009   #2
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Sept. 26th Crown Point Corvette Drags

you and me make 2 so far!!
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 08-18-2009   #3
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Sept. 26th Crown Point Corvette Drags

Quote:
Originally Posted by Paul Workman View Post
you and me make 2 so far!!
So what's the story on your motor?
XfireZ51 is offline   Reply With Quote
Old 08-19-2009   #4
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Sept. 26th Crown Point Corvette Drags

Quote:
Originally Posted by XfireZ51 View Post
So what's the story on your motor?
Da plan...

Dr. Pete is good enough to pull the heads this w/e(?) after which I'm going to finish the porting and we'll get "whatever" done to fix the hurt cylinder. (Might install new guides n seals too, while at it!

Then it's back together, time the cams, and mebby me ol buddy ol pal Dom can help me with a tune(?) just in time to do battle at US41. Sound like a "plan"?

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry
Paul Workman is offline   Reply With Quote
Old 08-19-2009   #5
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Sept. 26th Crown Point Corvette Drags

Quote:
Originally Posted by Paul Workman View Post
Da plan...

Dr. Pete is good enough to pull the heads this w/e(?) after which I'm going to finish the porting and we'll get "whatever" done to fix the hurt cylinder. (Might install new guides n seals too, while at it!

Then it's back together, time the cams, and mebby me ol buddy ol pal Dom can help me with a tune(?) just in time to do battle at US41. Sound like a "plan"?

P.
While your motor is out, why don't you get me your chip so I can have a current copy of your tune. I'll need it as a starting
point.
XfireZ51 is offline   Reply With Quote
Old 08-19-2009   #6
jimmac28
 
jimmac28's Avatar
 
Join Date: Jul 2009
Location: South Side of Chicago
Posts: 122
Default Re: Sept. 26th Crown Point Corvette Drags

I’ll be there with the Z, I won’t race but I'm looking forward to a good time.
__________________
Jim

1994 Corvette convertible Sold.

92 #178, Haibeck chip,Hawk brake's,RC injectors, B&B cat back, X-Pipe and 49th St. Rockers sold.







jimmac28 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020