|
08-10-2009
|
#11 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Our first LT5 pull = no problems
Paul/Lee WTF you guys are nuts it was freaking humid yesterday.
Temps in the low 90's are ok if humidity was 10-20% & dewpoint of 35  You guys could've used my garage with A/C, just pay the luxury tax Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
08-10-2009
|
#12 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Our first LT5 pull = no problems
I wore a thong most of the day Pete....
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
08-10-2009
|
#13 | |
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Our first LT5 pull = no problems
Quote:
 
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
|
08-10-2009
|
#14 | |
|
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: Our first LT5 pull = no problems
Quote:
I couldn't come anyway my thong is still at the cleaners from the last engine pull thong party it was a mass.  I'm sure Kieth would have come. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
|
08-10-2009
|
#15 |
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
|
Re: Our first LT5 pull = no problems
So Paul, what's the plan? 368... 415... 427... 440? At the very least now that the engine is out, have the heads done, valve job, switch over to the later valve guides and seals. Have Pete do the cam timing. Then powdercoat or paint those cam covers, plenum and IH's. Doing the work yourself or farming it out?
Good luck H 
__________________
90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold. |
|
|
|
|
08-10-2009
|
#16 | ||
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,707
|
Re: Our first LT5 pull = no problems
Quote:
Quote:
Lee, NEVER say thong to a Greek! Especially if you are male or a goat. |
||
|
|
|
|
08-10-2009
|
#17 | |
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Our first LT5 pull = no problems
Quote:
AND...paint the cam covers, etc too. Someday maybe. But, gotz ta be practical, more or less. Besides...the Corvette Challenge at US41 might go down (how's that coming btw?), and 80-100 new hp would prolly be good enough for this year - at least enough to put a stake in the ground (and maybe some other club member's hearts...  ). No? If I were to go bigger, then the complications would most likely get in the way of racing with youz guyz this fall. I wouldn't want to miss any of that.Stay tuned! P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
|
08-10-2009
|
#18 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,707
|
Re: Our first LT5 pull = no problems
Paul,
Check my post on the Crown Point Drags. Looks like Sept 26th. Time should be enough to get it running. |
|
|
|
 |
|
|
Linear Mode
