![]() |
#1 |
Join Date: Oct 2004
Location: Tennessee
Posts: 197
|
![]()
Anybody have an idea what the MPH at one mile from a standing start would be for our cars?
I have been kicking around the idea of traveling out to Laurinburg NC and doing a high speed run at the "Maxton Mile" that is put on by the East Coast Timing Association (ECTA). An old Army buddy of mine is the ECTA’s Race Director and he has been after me to bring the Beast out there to play. The speed sets the type of safety equipment required, so I sort of need a ballpark idea. Thanks! ![]() |
![]() |
![]() |
![]() |
#2 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,624
|
![]()
stock will be around 130 I think
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#3 |
Join Date: Mar 2009
Location: Elgin, IL
Posts: 21
|
![]()
A new C6 standard Vette was clocked at 154mph at the standing mile by Road & Track. That would be a good place to start estimating.
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Figure 150 + or - a few. Modded with porting and headers figure high 150's
|
![]() |
![]() |
#5 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,624
|
![]()
150? damn I need to get my car out of storage....
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#6 |
Join Date: Mar 2009
Location: Elgin, IL
Posts: 21
|
![]()
I keep waiting for someone to say..."Hold on I will be right back!!!" and then come back with a "Hey I just ran a 152mph in the standing mile using the markers on the expressway" Anyone...
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() Join Date: Jun 2005
Location: pittsburgh
Posts: 4,624
|
![]()
if jeff says 150ish 150ish it is
__________________
It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B" |
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Jul 2005
Location: Northern California
Posts: 73
|
![]()
I have a 93 with headers and Heibeck chip, ran 157mph in the mile shoot out in Vegas. Those with top end work were running 160+.
Thanks, Jerry |
![]() |
![]() |
![]() |
#9 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,446
|
![]()
ran 155 with borla, k&n, haibeck chip, 4.10 gears, aprox 325 rwhp
ran 166.4 with headers, corsa, haibeck chip, porting, 4.10 gears, close to redline in 5th, 411 rwhp you don't want 6th 2008 zo6 ran 166.5 get ready to buy/wear/install safety stuff you only live 1 time, go for it |
![]() |
![]() |
![]() |
#10 |
Join Date: Dec 2005
Posts: 688
|
![]()
Stocker 1992
![]() ![]() |
![]() |
![]() |
![]() |
|
|