![]() |
#1 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
Well the good news is I fixed the Vacuum leak....the bad..I am getting the no start. I originall ythought it was the battery, once replaced the car started right back up. Then this week with the new battery I go the no start again. The battery is showing 3.68AMPs and 12.42 volts when tested with a Fluke meter.
I notice that when I push in the clutch there is a volt drop...but not sure that means the Clutch relay is working or not. I am guessing starter, any other guesses? Ignition switch?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#2 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,661
|
![]()
1. Jumper out the Clutch safety switch.
2. Replace Starter relay under dash. 3. Install my patented "Dreaded No Start Cure". ![]() TomC "Crabs" |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
Would I be seeing a voltage drop when I depress the clutch if the relay/switch was bad? Car started right back up when I went out again.
Any opinions.....
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 03-22-2009 at 09:25 PM. |
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,158
|
![]()
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Feb 2006
Location: Iowa aka "one big cornfield"
Posts: 339
|
![]()
Had the dreaded no starts 2years ago and did "tccrab" Dreaded No Start Cure and have had zero no starts! Thanks Tom!!
![]() |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jul 2005
Location: Mendota Heights, MN. 55120
Posts: 983
|
![]() |
![]() |
![]() |
![]() |
#7 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,406
|
![]()
i believe if you are getting voltage drop you are ok .tto double ck work the clutch in and out while having the key in start mode. i found thatmy floor mat had bunched up once and couldnt press the clutch in far enough to activate the switch
![]() |
![]() |
![]() |
![]() |
#8 |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
![]() |
![]() |
![]() |
![]() |
#9 |
![]() Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
![]()
Just got my floor mats tonight, so not the issue.....trying to get someone to tell me if the volt drop when I depress the clutch pedal means anything? To me it would mean the relay is working....but not sure,looking for feedback. I guess Jeff is saying it does not mean that the switch is working.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
![]() |
![]() |
![]() |
#10 | |
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,685
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|