check out some custom items - ZR-1 Net Registry Forums

RICKYRJ1 · 02-15-2009

Here are some pics of some of my winter projects. Half shalfs, drive shalf and wheel powder coated ZR1 logo is a decal applied and then cleared over. Center cap is a CT machining custome made(thanks Carter) Wheels are three pc., had the 2 barrels done blk and center as shown;sparkle silver. Feedback???

ZZZZZR1 · 02-15-2009

Woah!!!!!!!!!!!!

Thats awesome!

tf95ZR1 · 02-15-2009

Beautiful!
I can't wait to see what it all looks like on your car.
Or will you just mount it on your wall as art?

GOLDCYLON · 02-15-2009

Ricky is the wheel just a hubcap ie wall art?? I understand the halfshafts as the business end lol.

RICKYRJ1 · 02-15-2009

Quote:

Originally Posted by GOLDCYLON

Ricky is the wheel just a hubcap ie wall art?? I understand the halfshafts as the business end lol.

GC, the center hub needs to be put back together with the inside barrel. (40 bolts) The pic shown is of the front. The rear has a deeper lip to it. The red pin stripe around the perimeter is just a 1/8" temp. sticker. I think I am going to go to 3/16 to 1/4 red around the perimeter and maybe have it start at the edge of the rim. I have an artist who does alot of hot rods & custom bikes laying that down this week. Not sure, have to see it both ways and see what I like. I decided to go with the black PC because I have all of my suuspension polished. I think the contrast really makes it POP.

I picked up a C-beam(delivered yesterday)which will be polished and look sweet w/ the black drive shaft. I also have a new batwing coming which will be treated to the same thing. The linkage connected to the batwing will be a combination of black PC and polish. I'm going in the spare tire delete direction so all behind me will see how cool the mighty Z looks hot, top to bottom. Oh yea, each half shaft has the ZR1 logo on both sides, so when it spins the logo should be seen constant. Not that anybody will see but I polished my gas tank last week. Somebody stop me before they come take me away.

Next step, performance mods!! I had Viper 4.10 dropped off last week.

QB93Z · 02-15-2009

Looking good Rick. I see you have been making good use of your time this winter.

Jim

carter200 · 02-15-2009

Ricky,
Thanks for the kudos. Looking sweet

ScottZ95ZR1 · 02-15-2009

Absolutely awesome Rick. I hope to see your car in person one day.
And I hope my sickness does not progress to the point yours has.

02-15-2009

Wow, awesome. You'll be able to go into the car show circuit and win some trophies with those custom mods.

GOLDCYLON · 02-16-2009

Quote:

Originally Posted by RICKYRJ1

GC, the center hub needs to be put back together with the inside barrel. (40 bolts) The pic shown is of the front. The rear has a deeper lip to it. The red pin stripe around the perimeter is just a 1/8" temp. sticker. I think I am going to go to 3/16 to 1/4 red around the perimeter and maybe have it start at the edge of the rim. I have an artist who does alot of hot rods & custom bikes laying that down this week. Not sure, have to see it both ways and see what I like. I decided to go with the black PC because I have all of my suuspension polished. I think the contrast really makes it POP.

I picked up a C-beam(delivered yesterday)which will be polished and look sweet w/ the black drive shaft. I also have a new batwing coming which will be treated to the same thing. The linkage connected to the batwing will be a combination of black PC and polish. I'm going in the spare tire delete direction so all behind me will see how cool the mighty Z looks hot, top to bottom. Oh yea, each half shaft has the ZR1 logo on both sides, so when it spins the logo should be seen constant. Not that anybody will see but I polished my gas tank last week. Somebody stop me before they come take me away.

Next step, performance mods!! I had Viper 4.10 dropped off last week.

Well ok that make sense now its a multipiece wheel. Well it looks pretty darn nice. !

02-15-2009	#2
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,674	Re: check out some custom items Woah!!!!!!!!!!!! Thats awesome!

02-15-2009	#3
tf95ZR1 Join Date: Aug 2005 Location: Northridge, CA Posts: 1,456	Re: check out some custom items Beautiful! I can't wait to see what it all looks like on your car. Or will you just mount it on your wall as art?

02-15-2009	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: check out some custom items Ricky is the wheel just a hubcap ie wall art?? I understand the halfshafts as the business end lol. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

02-15-2009	#6
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: check out some custom items Looking good Rick. I see you have been making good use of your time this winter. Jim

02-15-2009	#7
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,418	Re: check out some custom items Ricky, Thanks for the kudos. Looking sweet __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155

02-15-2009	#8
ScottZ95ZR1 Join Date: Mar 2008 Location: Pendleton, IN Posts: 672	Re: check out some custom items Absolutely awesome Rick. I hope to see your car in person one day. And I hope my sickness does not progress to the point yours has. Last edited by ScottZ95ZR1; 02-16-2009 at 07:35 AM.

02-15-2009	#9
HAWAIIZR-1 Guest Posts: n/a	Re: check out some custom items Wow, awesome. You'll be able to go into the car show circuit and win some trophies with those custom mods.