|
12-29-2008
|
#11 | |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
Quote:
Any particular sequence for tightening?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
12-29-2008
|
#12 | |
 Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
Quote:
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
|
|
|
|
|
12-29-2008
|
#13 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
Are all three piece wheels like this (Sealant issues?) Im think even Fikse Fm series? GC
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
12-29-2008
|
#14 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
Quote:
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
01-03-2009
|
#15 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
Hey Locobob,
I removed one Center tonight.. the nuts do not appear to be lock nuts.. What Loctite would you recommend? They came apart rather easily, so the 20-25 ft lbs make sense
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
01-03-2009
|
#16 |
|
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: ZR-1 and Shebly wheels ( Polishing and cleaning)
It's possible some of the wheels have different hardware on them, I have a different style bolt between the fronts and the rears. If you don't have the lock nuts I'd use a low strength lock tight - you may want to take them apart again someday.
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
|
|
|
 |
|
|
Linear Mode
