ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 07-19-2008   #1
billybaloneey
 
billybaloneey's Avatar
 
Join Date: May 2008
Location: Mauriceville, Texas
Posts: 179
Default Size Matters

A new owner here, so forgive these seemingly simple questions.

I know that the rear end body parts on the ZR-1 are bigger than the standard C4...to accommodate the wider tires.

1) are the doors a different size?
2) are the rear side light housings a different size?
3) are the brake and turn signal lenses a different size?
4) are the backup lenses and license plate assembly a different size?
5) is the rear end carpet and internal trim a different size?
6) is the "CORVETTE" script a different size?
7) within the ZR-1 line, 90-95, were there any parts that changed size/fitments from year to year? In other words will the early ZR-1 body parts fit the late model ZR-1's

Is there a list published anywhere that points out all of the differences between a ZR-1 and a standard C4...front to back? Obviously 75% or more of what's in the engine compartment is unique to the ZR-1. Other than the engine itself, what are some of the other items in the engine compartment that are ZR-1 specific?

Thanks,
Clint aka billybaloneey
__________________
Clint aka billybaloneey

'94 - C4 ZR-1 #445 - Black/Black
'05 - C6 silver/black 6sp
'85 - C4 white/graphite (almost done) automatic
'78 - C3 silver/black (a work in progress) automatic
billybaloneey is offline   Reply With Quote
Old 07-19-2008   #2
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: Size Matters

1: yes
2: no
3: yes
4: yes, not a different size but a different assembly
5: no
6. from the normal C4 yes
7: not that i'm aware of other then the rub strip.


the ac compressor, rad, ecm, lines, belts...
this is all as far as I know, and i could be wrong.


Jeff you out there?
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 07-19-2008   #3
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: Size Matters

For #6 and #7, the "CORVETTE" emblem is larger on the '91+ models (of which non-Z's didn't have an emblem anymore). The 1990 has the same sized emblem as all '84-90 'vettes.
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Old 07-19-2008   #4
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: Size Matters

Quote:
Originally Posted by Kevin
1: yes
2: no
3: yes
4: yes, not a different size but a different assembly
5: no
6. from the normal C4 yes
7: not that i'm aware of other then the rub strip.


the ac compressor, rad, ecm, lines, belts...
this is all as far as I know, and i could be wrong.


Jeff you out there?
You forgot to mention the "grin" is wider (on the ZR-1 drivers ).

P.
Paul Workman is offline   Reply With Quote
Old 07-19-2008   #5
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,157
Default Re: Size Matters

I did not think the Brake and Turn Signal Lenses were a different size (#3)
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 07-19-2008   #6
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: #3

Quote:
Originally Posted by -=Jeff=-
I did not think the Brake and Turn Signal Lenses were a different size (#3)
I never measured them to compare, but couldn't help but notice the proportion appeared to remain the same, in spite of the wider tail. So, I wondered if the ZR-1 lenses were not a tad bigger. Someday, I'll have a ruler along and satisfy/confirm what I suspected for some time.

P.
Paul Workman is offline   Reply With Quote
Old 07-19-2008   #7
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,157
Default Re: #3

Quote:
Originally Posted by Paul Workman
I never measured them to compare, but couldn't help but notice the proportion appeared to remain the same, in spite of the wider tail. So, I wondered if the ZR-1 lenses were not a tad bigger. Someday, I'll have a ruler along and satisfy/confirm what I suspected for some time.

P.
Guess I will look up the PN for any given year 91-95 and compare to the narrow body, but I am betting they are the same

Reverse light ARE different though
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 07-19-2008   #8
32valvZ
 
32valvZ's Avatar
 
Join Date: Nov 2007
Location: Sunshine State
Posts: 1,071
Default Re: Size Matters

Brake and turn signal lens approximate measurements are the same on my 93 Ruby (LT1) and on my 92ZR-1 Tail light/brake lens are about 6 1/4" wide by 5" high on both cars. Reverse lights measure 3" wide and 6 1/2" on both cars. Rear side light/reverse lights are 1 7/8" high and 10" long on both cars.

As far as differences in body panels go (within the ZR-1 line), aside from the belt moulding, as someone mentioned, the front 1/4 side covers are different. The 90 stands alone. The 91-94 are another style & the 95 are also stand alone.
__________________
[B]1990 #2815[/B]
[COLOR="Red"][B]Red/Red[/B][/COLOR]
Ported Plenum & IH (by Pete)
Haibeck Chip
Rebuilt FPR (by Phil)
FIC Injectors
Watson LT Headers
3" Stainless Works exhaust
Lingenfelter Open Air Lid
Bill B Built Transmission
Shifter & C Beam Plates


[FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT]
[FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT]
[B]SOLD[/B]

Last edited by 32valvZ; 07-19-2008 at 04:57 PM.
32valvZ is offline   Reply With Quote
Old 07-19-2008   #9
Jeffvette
Guest
 
Posts: n/a
Default Re: Size Matters

Quote:
Originally Posted by billybaloneey

1) are the doors a different size?
Yes, the door line is different in about the middle. You can see it starting to bow out.

Quote:
2) are the rear side light housings a different size?
No, they are the same.

Quote:
3) are the brake and turn signal lenses a different size?
No, they are the same.

Quote:
4) are the backup lenses and license plate assembly a different size?
License plate frame (black portion) is different. The back up lights are the same.

Quote:
5) is the rear end carpet and internal trim a different size?
No, the inner tub is the same. So the carpet is the same.


Quote:
6) is the "CORVETTE" script a different size?
90 is smaller than the 91-95 CORVETTE emblem. But in 90 they were the same size.

Quote:
7) within the ZR-1 line, 90-95, were there any parts that changed size/fitments from year to year? In other words will the early ZR-1 body parts fit the late model ZR-1's
Yes, everything will bolt right up, or I should say bond right up in certain cases.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020