|
07-14-2008
|
#1 |
 
Join Date: Mar 2006
Location: Lubbock, TX
Posts: 79
|
A/C Compressor Replacement
A/C compressor replacement
Changing the compressor assembly for a friend on a 90 ZR-1 (#2855). The hose connection on the new compressor is different from the old one. Any idea what I need to do now? Buy new hose, etc… Thanks
__________________
Jon R. Member #490 1992 ZR-1 Arctic White/Red 2008 Z51 Silver 6 spd (Daily driver) 
|
|
|
|
07-14-2008
|
#2 |
|
Guest
Posts: n/a
|
Re: A/C Compressor Replacement
Sounds like you got the wrong one. The fitting going into the compressor is the same 90-95.
Where did you get the compressor? |
|
|
|
07-14-2008
|
#3 |
|
Join Date: May 2006
Location: Canada
Posts: 139
|
Re: A/C Compressor Replacement
I thought where the lines connected to the compressors changed. The early ones were level across the two lines and the later had a step so one port was lower then the other. I could be wrong though!
|
|
|
|
|
07-14-2008
|
#4 | |
|
Join Date: Mar 2006
Location: Lubbock, TX
Posts: 79
|
Re: A/C Compressor Replacement
Quote:
Thanks
__________________
Jon R. Member #490 1992 ZR-1 Arctic White/Red 2008 Z51 Silver 6 spd (Daily driver)
|
|
|
|
|
|
07-14-2008
|
#5 |
|
Guest
Posts: n/a
|
Re: A/C Compressor Replacement
Yep, that is correct on the hose. My manual shows 90-95 is the same for the hose, probably due to the fact the other hoses have been disc.
|
|
|
|
07-14-2008
|
#6 |
|
Join Date: Mar 2006
Location: Lubbock, TX
Posts: 79
|
Re: A/C Compressor Replacement
FYI - I got the answer. I just swapped the old manifold onto the new compressor. Now I need the o-rings and Im in buisness. Car is back together now.
\w/
__________________
Jon R. Member #490 1992 ZR-1 Arctic White/Red 2008 Z51 Silver 6 spd (Daily driver)
|
|
|
|
 |
|
|
Linear Mode
