|
07-04-2008
|
#1 |
  
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
Driver Side Rear Quarter Moulding Repair
I was getting out of the Z the other night and somehow my pant pocket snaged the short molding piece that fits between the door and rear wheel well and broke it off. It broke at the back side tab that fits under the two plastic body clamping retainers. I would appreciate advice on how to go about repairing such as what kind of glue works with this plastic, or where I can find a replacement molding piece.
Thanks, |
|
|
|
07-04-2008
|
#2 |
 
Join Date: Feb 2006
Location: San Antonio area
Posts: 1,177
|
Re: Driver Side Rear Quarter Moulding Repair
The part is probably common with the standard cars if you choose to replace it, else JBWeld.
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer |
|
|
|
|
07-06-2008
|
#3 | |
Join Date: Dec 2007
Location: Fremont, CA
Posts: 3,087
|
Re: Driver Side Rear Quarter Moulding Repair
Quote:
|
|
|
|
|
|
07-06-2008
|
#4 | |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: Driver Side Rear Quarter Moulding Repair
Quote:
base part fits okay.. Anyone know of the Door trim for 90 is still avail?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
07-06-2008
|
#5 |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: Driver Side Rear Quarter Moulding Repair
The rear dogleg moulding? Its long discontinued? And ZR-1 specific
Jeffvette had a complete rear set availalbe for the 91-95 MY in red. I think besides being black the 90 MY is a one of year.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 07-06-2008 at 02:51 PM. |
|
|
|
|
07-06-2008
|
#6 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
Re: Driver Side Rear Quarter Moulding Repair
Update:
Thanks for the replies. I was able to make a perfect repair of the broken tab on the original molding piece using Devcon Plastic Welder http://www.devcon.com/products/produ...m?familyid=182 |
|
|
|
 |
|
|
Linear Mode
