|
2 Days Ago
|
#1 |
 Join Date: May 2024
Location: Houston
Posts: 21
|
Oil Pressure Sensor
I replaced the oil pressure sensor - 3 prong -part was 1990 Silverado 5.7L - the electric wire clip is broke as well - the replacement with three prongs has three wires - the stock one on the car has 1 wire - will that work and just cut the extra 2 wires?
Arlie 1990 ZR1 #849 |
|
|
|
17 Hours Ago
|
#2 |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,393
|
Re: Oil Pressure Sensor
I think you are mixing/confusing the Oil Pressure Sensor (3 wire) with the Oil Pressure Switch (1 wire)
SENSOR https://www.jerrysgaskets.com/sensor...new-90-95-9b2/ SENSOR CONNECTOR https://www.jerrysgaskets.com/connec...-1990-95-15d1/ SWITCH: https://www.jerrysgaskets.com/switch...new-90-95-9b3/ SWITCH CONNECTOR: https://www.jerrysgaskets.com/connec...-1990-95-12b5/ 
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
13 Hours Ago
|
#3 |
|
Join Date: May 2024
Location: Houston
Posts: 21
|
Re: Oil Pressure Sensor
Looks like i might - according to the pic i am dealing with 12555492 - but it definitely only has one wire -
|
|
|
|
|
10 Hours Ago
|
#4 | |
  
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,807
|
Re: Oil Pressure Sensor
Quote:
|
|
|
|
|
 |
|
|
Linear Mode
