![]() |
#1 |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,813
|
![]()
I had to remove the front bumper Facia on a 1990 zr1 to replace a fog light housing and somehow disconnected a couple lines from the top of the charcoal canister. Where do these lines connect?
A single line shown in first photo comes out of top of canister and goes to a "T" and both lines from the "T" are open. Does either line connect to anything? And.......there is a trick or two on removing the front bumper Facia and the fog light housing if you ever have to do that job ![]() ![]() ![]() ![]()
__________________
Clickable links ![]() On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by Dynomite; 11-26-2023 at 10:00 AM. |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Apr 2004
Location: Atlanta, GA
Posts: 2,170
|
![]()
PM me an email I can send pics of mine, no way to post pics here
FSM Section 6E3-C3-1 to 4 Sent mine looks a bit different as far as routing OK I found the line it comes off the bottom of the canister as one line comes out and Ts both lines off the T are open.
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 11-23-2023 at 06:40 PM. |
![]() |
![]() |
![]() |
#3 | |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,813
|
![]() Quote:
Thank you......appreciate the confirmation ![]()
__________________
Clickable links ![]() On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS |
|
![]() |
![]() |
![]() |
|
|