|
09-22-2023
|
#1 |
|
Join Date: Feb 2023
Location: Burnaby Canada
Posts: 3
|
No start help!!
I have a strange problem?
I ordered up all new injectors from FIC and installed them, fun stuff. Took my time, disconnected the battery and everything. No I have a no start problem. Pretty sure it?s not the injectors, I smell fuel and had a fuel pressure gauge on the rail, shows a drop in pressure as it cranks. Put a coil tester online with a spark plug? no spark! Pull the plenum back off to check all my connections, even took them off to make sure no bad connectors, put back together. Still no start. No codes come up, fuses are good, key on, security light is off?. What am I missing? Please help! |
|
|
|
09-22-2023
|
#2 |
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,748
|
Re: No start help!!
You're positive everything is plugged in?
Check for bent pin on the ignition module that pain in the *** that's on the plenum.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
09-22-2023
|
#3 |
|
Join Date: Feb 2023
Location: Burnaby Canada
Posts: 3
|
Re: No start help!!
Checked everything. May have to pull it apart a third time!!
|
|
|
|
|
09-22-2023
|
#4 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,706
|
Re: No start help!!
Quote:
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
|
09-22-2023
|
#5 |
 Join Date: Aug 2010
Location: ottawa canada
Posts: 156
|
Re: No start help!!
As Phrogs Said Double check the pins on the Ign. Module !!
|
|
|
|
|
09-23-2023
|
#6 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,654
|
Re: No start help!!
Just in case it's not entirely clear, the ignition module is the device that lives on the bottom side of the plenum.
It's also known as the DIS module. It has connectors in front and the back. It's very easy to bend a connection pin on either of the plugs, especially the one on the back. Suffice to say, it is a serious design flaw, that really should never made it into production. Given all the other stuff going on under the plenum, it's the only thing that will stop the coils from firing. Good luck!! Crabs
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] Last edited by tccrab; 09-23-2023 at 11:07 AM. |
|
|
|
|
09-26-2023
|
#7 |
 
Join Date: Jan 2009
Location: New jersey
Posts: 156
|
Re: No start help!!
Check inj 1 fuse, is it blown?
If yes, you may have pinched an injector wire in between the upper and lower plenum. Start there, a dead inj 1 fuse signifies a grounded hot wire to the injectors, coils, control module.. easy check John |
|
|
|
|
09-27-2023
|
#8 |
Join Date: Dec 2019
Location: st louis mo
Posts: 749
|
Re: No start help!!
its definatly somthing you had your hands on,so back apart you go
__________________
95 admiral blue z(sold)/ / 93 ruby z(sold) 91 steel blue z/95 aqua z haibeck 510, 91 callaway 415 areobody #5 |
|
|
|
 |
|
|
Linear Mode
