Headliners - ZR-1 Net Registry Forums

Tim · 05-09-2022

My 90 Z need a new headliner in black. A source, part number and any suggestions please Thank You Tim

mlipmd · 05-09-2022

Don't waste a ginormous amount of money on a new headliner. Replace it yourself. There are innumerous videos on youtube on how to do this, quite simple actually. I removed my old headliner and replaced it without even taking the roof off and it looks original. I think I even bought the fabric from Walmart (or maybe Joanne's Fabric) along with a spray can of fabric adhesive to attach it to the felt headliner backing and the total cost of replacement was maybe $30.

Matt B · 05-10-2022

I was into this matter also but still haven't found a material that EXACTLY matches the original fabric so it might pass NCRS. Recommendations welcome...

WARP TEN · 05-10-2022

i replaced the headliner on one of my Zs--I can't remember which--and it was easy to do. Just remember to use high temperature headliner adhesive when you do it or after a hot day it may be sagging. And you might take a sample of your headliner material to one of the large fabric stores and see if they can match it fairly closely. That's what I did. --Bob

Corvette95 · 05-13-2022

Cardboard, "felt" from a yarn store (take a sample of your current liner with you) , gorilla glue (standard or they have a non-expansion option now- I had no problem with the standard Gorilla glue and a LIGHT mist coat of water ). Cut cardboard to fit your targa - get card board that is big enough to cut a section that has NO flap or lid, straight piece of cardboard. Cut felt to size including enough to overlap onto the top of the cardboard. pour out some Gorilla glue, take a small paint roller, run roller over glue (a little goes a long way) put one light coat over the cardboard ,then take a spray bottle with water and put a LIGHT mist coat of water on the cardboard, then immediately lay the felt on the cardboard.Use small thumbtacks to hold the felt on- tacks on roof side not the inside - the part that you see. Have a helper to LIGHTLY stretch felt down on the card board without any wrinkles. turn felt side down and put some light weight on it, whatever you have, all across the backside of the cardboard. Let dry over night. remove old liner, clean surface and install your new liner with a heavier c oat of gorilla glue, don't glue too close to edge of liner, mist water on the targa panel itself and a light mist coat on the back headliner side. Let sit overnight (if you have light weight to put on it that's great. Sandbags work great. My way have passed NCRS and Bloomington Gold. The key is LIGHT glue, light pressure.

billschroeder5842 · 05-13-2022

I bought a kit from Corvette Central and it was pretty squared away. I prepped my top by cleaning and a light sanding to remove residual glue, the applied the double sided tape and then "press fitted" the headliner into place.

Not a big deal.

05-09-2022	#1
Tim Join Date: Aug 2004 Location: ND Posts: 87	Headliners My 90 Z need a new headliner in black. A source, part number and any suggestions please Thank You Tim __________________ THanks, Tim

05-09-2022	#2
mlipmd Join Date: Mar 2021 Location: Crawfordville, FL Posts: 216	Re: Headliners Don't waste a ginormous amount of money on a new headliner. Replace it yourself. There are innumerous videos on youtube on how to do this, quite simple actually. I removed my old headliner and replaced it without even taking the roof off and it looks original. I think I even bought the fabric from Walmart (or maybe Joanne's Fabric) along with a spray can of fabric adhesive to attach it to the felt headliner backing and the total cost of replacement was maybe $30.

05-10-2022	#3
Matt B Join Date: Jan 2021 Location: Beautiful Bavaria Posts: 523	Re: Headliners I was into this matter also but still haven't found a material that EXACTLY matches the original fabric so it might pass NCRS. Recommendations welcome... __________________ ZR-1 #638/1991

05-10-2022	#4
WARP TEN Join Date: Apr 2007 Location: Lake Bluff, IL Posts: 2,095	Re: Headliners i replaced the headliner on one of my Zs--I can't remember which--and it was easy to do. Just remember to use high temperature headliner adhesive when you do it or after a hot day it may be sagging. And you might take a sample of your headliner material to one of the large fabric stores and see if they can match it fairly closely. That's what I did. --Bob __________________ 2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough"

05-13-2022	#5
Corvette95 Join Date: Jan 2006 Location: Decatur, AL Posts: 1,119	Re: Headliners Cardboard, "felt" from a yarn store (take a sample of your current liner with you) , gorilla glue (standard or they have a non-expansion option now- I had no problem with the standard Gorilla glue and a LIGHT mist coat of water ). Cut cardboard to fit your targa - get card board that is big enough to cut a section that has NO flap or lid, straight piece of cardboard. Cut felt to size including enough to overlap onto the top of the cardboard. pour out some Gorilla glue, take a small paint roller, run roller over glue (a little goes a long way) put one light coat over the cardboard ,then take a spray bottle with water and put a LIGHT mist coat of water on the cardboard, then immediately lay the felt on the cardboard.Use small thumbtacks to hold the felt on- tacks on roof side not the inside - the part that you see. Have a helper to LIGHTLY stretch felt down on the card board without any wrinkles. turn felt side down and put some light weight on it, whatever you have, all across the backside of the cardboard. Let dry over night. remove old liner, clean surface and install your new liner with a heavier c oat of gorilla glue, don't glue too close to edge of liner, mist water on the targa panel itself and a light mist coat on the back headliner side. Let sit overnight (if you have light weight to put on it that's great. Sandbags work great. My way have passed NCRS and Bloomington Gold. The key is LIGHT glue, light pressure. __________________ Corvette95 Registry and Forum (*************) 1989 C4 Conv Wht/Gry Auto Hardtop Top Flight SOLD 1995 C4 Coupe Purple/Blk 6 Speed 1989 C4 Conv Wht/Red Auto SOLD 1996 C4 Conv Black/Tan Auto SOLD 1994 C4 Coupe Wht/Blk SOLD 1995 C4 ZR-1 White/Gry #278 Dual Dunn Head SOLD 1986 C4 Coupe Black/Red 4+3 SOLD 1990 C4 ZR-1 Red/Red #0454

05-13-2022	#6
billschroeder5842 Join Date: Nov 2016 Location: Southlake, TX Posts: 592	Re: Headliners I bought a kit from Corvette Central and it was pretty squared away. I prepped my top by cleaning and a light sanding to remove residual glue, the applied the double sided tape and then "press fitted" the headliner into place. Not a big deal. __________________ Bill Schroeder Texas Proud! 1991 Corvette ZR1 #1388 2015 Challenger Scat Pack Shaker