Rear amber indicators. - ZR-1 Net Registry Forums

Ozruss90 · 03-21-2022

Can anyone steer me in the right direction on how to make the inner 2 lamps only, work as the indicators. I have the amber lenses. It?s an state requirement here in Australia for registration that the rear indicator be amber. Thanks in advance.

dredgeguy · 03-21-2022

Not sure if they have a kit for what you are looking for but worth a try:
https://www.webelectricproducts.com/
Good luck and let us know.

G8nightman · 03-21-2022

You should be able to modify the harness. You can use a test light to figure out what wire does what and then just cut the ones you don't need to get the configuration you want

-=Jeff=- · 03-21-2022

you will need to run an extra wire.. from the turn signal switch under the dash, or snag the brake light wire from the CHMSL.. I ran an new wire form the switch for my euro lamps, that new wire became the brake light and the existing wire became the turn signal.

davids1978 · 03-22-2022

You will need to modify your tail lights, parkers and install side markers to get a VASS (as well as set belts etc). I have some PDF instructions but can't seem to post them here, send me a PM and I'll try to attach it to the reply.

The alternative is to have someone take care of all modifications, engineering & RWC - I can recommend someone in Melbourne if you want to go down this path (he did my 95 last year).

Ozruss90 · 03-22-2022

Quote:

Originally Posted by davids1978

You will need to modify your tail lights, parkers and install side markers to get a VASS (as well as set belts etc). I have some PDF instructions but can't seem to post them here, send me a PM and I'll try to attach it to the reply.

The alternative is to have someone take care of all modifications, engineering & RWC - I can recommend someone in Melbourne if you want to go down this path (he did my 95 last year).

Thanks David, PM sent.

03-21-2022	#1
Ozruss90 Join Date: Oct 2016 Location: Shepparton. Vic. Australia Posts: 161	Rear amber indicators. Can anyone steer me in the right direction on how to make the inner 2 lamps only, work as the indicators. I have the amber lenses. It?s an state requirement here in Australia for registration that the rear indicator be amber. Thanks in advance.

03-21-2022	#2
dredgeguy Join Date: Aug 2012 Location: Ellicott City, MD Posts: 1,716	Re: Rear amber indicators. Not sure if they have a kit for what you are looking for but worth a try: https://www.webelectricproducts.com/ Good luck and let us know. __________________ Charlie __________ Dredgeguy WAZOO Member 1992 Bright Red/Black ZR1 #246 Dana 4:10 gears Polished LT5 by Haibeck Polished Fikse FM5's with Michelin Pilot Sport 2 Stainless Works headers and cats with Corsa

03-21-2022	#3
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,185	Re: Rear amber indicators. You should be able to modify the harness. You can use a test light to figure out what wire does what and then just cut the ones you don't need to get the configuration you want __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

03-21-2022	#4
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,156	Re: Rear amber indicators. you will need to run an extra wire.. from the turn signal switch under the dash, or snag the brake light wire from the CHMSL.. I ran an new wire form the switch for my euro lamps, that new wire became the brake light and the existing wire became the turn signal. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

03-22-2022	#5
davids1978 Join Date: Feb 2021 Location: Melbourne Posts: 4	Re: Rear amber indicators. You will need to modify your tail lights, parkers and install side markers to get a VASS (as well as set belts etc). I have some PDF instructions but can't seem to post them here, send me a PM and I'll try to attach it to the reply. The alternative is to have someone take care of all modifications, engineering & RWC - I can recommend someone in Melbourne if you want to go down this path (he did my 95 last year).