headers and x-pipe

[WantaKoth]

Dredgeguy thanks for clarifying. For some reason I thought I had to fab a small piece between the headers and corsa. Glad to hear they bolt right up.

[Paul Workman]

Mine too (SW) and X-pipe bolt right up. But, you will have to fab a little (let's call it a "Z" bracket) for the dipstick tube to attach to after removing the stock exhaust manifolds.
When I get my workshop built, I can unpack all my tools and fab a bracket for you. OR you can look at these photos and fab up you own.

Materials:

3/4" x ~ 3/32" thick strap (from any hardware store - I recommend steel as I had issues with aluminum breaking at the 90? bends. YMMV tho.)

1/2" long x 1/4" dia STOVE BOLT with lock washer and nut.

silver paint (optional)

The length of the material (link) for the bracket is 67mm.
The length of the header tab is ~ 19mm (3/4")
The length of the middle section too is ~ 19mm (3/4")
The long tab makes up the remainder of the link.