|
08-03-2021
|
#1 |
 Join Date: Sep 2005
Posts: 45
|
Powdercoat
Recommendations for prep on powdercoating intake, cam covers, injector housings, throttle body, air horn?
|
|
|
|
08-03-2021
|
#2 |
Join Date: Oct 2004
Location: Folsom CA
Posts: 1,655
|
Re: Powdercoat
This from Cliffs Solutions pages, follow the links about halfway down the page, under PowderCoating
http://www.zr1.net/forum/showpost.ph...67&postcount=7 Word to the wise, make sure that whomever does the job really understands what surfaces can be PC'd and which cannot. If the underside of the cam covers gets coated, you are totally screwed as the cam journals are integral to cam cover. Crabs
__________________
TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B] Last edited by tccrab; 08-03-2021 at 10:26 PM. |
|
|
|
|
08-04-2021
|
#3 |
 
Join Date: Oct 2017
Location: TX
Posts: 2,038
|
Re: Powdercoat
Double down on Crabs comment.
Would highly recommend you get someone that has done them before to do the work. 
__________________
Kenny 1990 #442 
|
|
|
|
|
08-04-2021
|
#4 |
 Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Powdercoat
Lgaff- Lee - did mine in 2014. Still looks great. 👍
|
|
|
|
 |
|
|
Linear Mode
